Wanting to MOD my JAGUAR

bill11hc · Post by **bill11hc** » Tue Sep 25, 2012 6:30 am

So basically i salvaged this beat up MIJ sunburst jaguar i found on craigslist 2 years ago... this kid was trying to get rid of it for 200 dollars because he thought he ruined the guitar. he routed out humbucker sized holes himself and failed. he made the holes too big and the mounting rings were lopsided. it was just a disaster. so i put single coil stock pickups back in it, gave it a nice mint green pickguard which i reliced ( sanded the finish off with scotch bright, and used the old shoe polish trick to give it a trashy dirty look), installed a buzzstop and a mustang bridge... SO i would now like to install a toggle switch like in the kurt cobain signature model jaguar. Where does one buy the toggle switch / plate from? i just find it so much more practical and love the way it looks. Anyone with information where i can buy the part please help! and eventually ill need the schematics too! thanks

-bill

honeyiscool · Post by **honeyiscool** » Tue Sep 25, 2012 7:24 am

People make it out of cutting wall plates.

NickS · Post by **NickS** » Tue Sep 25, 2012 11:06 am

Paging HNB....

Johnny Noir · Post by **Johnny Noir** » Tue Sep 25, 2012 1:16 pm

pictures please!

NickS · Post by **NickS** » Tue Sep 25, 2012 2:24 pm

http://www.shortscale.org/forum/viewtopic.php?t=47968

Awstin · Post by **Awstin** » Tue Sep 25, 2012 2:29 pm

Lets see that Jaguar!

and I got one of these plates from HNB. I don't know where he got it but I know there are a few guys on OS that make these and other custom control parts. But I guess they are high in demand because they told me there is a waiting list when I asked for one before. I think the one you are looking to buy costs $45.00 Correct me if I am wrong HNB.

HNB · Post by **HNB** » Tue Sep 25, 2012 3:50 pm

I got it from Paul Rhoney.

He goes by Stereordinary on OSG. You could pm him there. I saw you made the same post there.

If you google cobain wiring diagram, it will show you some wiring options.

bill11hc · Post by **bill11hc** » Thu Sep 27, 2012 3:12 pm

Thanks! I ordered the plate from Paul honey should be getting it within a week. I assume I have to buy to toggle switch seperately? If so what switch fits? If you can throw a link or a nameup whatever so I can search it on eBay that'd b a huh help! And as soon as I'm done installing it I shall post pictures of my girl!

robroe · Post by **robroe** » Thu Sep 27, 2012 6:19 pm

it would be simple to cut one out of a chromed lightswich plate using snips. just drill a hole in it for the toggle.

if you want a slider switch in there too that's going to be a pain in the ass.

circle holes are easy square holes take talent

bill11hc · Post by **bill11hc** » Thu Sep 27, 2012 11:59 pm

good idea but i already ordered a premade one....i was just wondering if i can buy a jazzmaster toggle for the plate if that would be the right fit

HNB · Post by **HNB** » Fri Sep 28, 2012 1:28 am

Jazzy ones are too long for the opening. The ones like this are best.

MMPicker · Post by **MMPicker** » Fri Sep 28, 2012 4:52 pm

Personally I don't like the way those plates look with just the toggle there by itself, there's too much unbroken expanse of chrome, more than you'd need for just the one switch, and it just doesn't look right to me. I think it looks a lot better if you keep the bass cut switch there too. Then it's fine.

bill11hc · Post by **bill11hc** » Sat Sep 29, 2012 8:43 pm

yes i agree the plate i am getting has the bass cut as well... HNB what kind of switch is that?

Spitfire7 · Post by **Spitfire7** » Sat Sep 29, 2012 10:33 pm

Do you have pictures of what it looked like when you first got it? Sounds like you got a steal.

bill11hc · Post by **bill11hc** » Tue Oct 02, 2012 6:46 am

unfortunately i never took pictures of it when i first got it...it was that ugly. i regret that.

HNB would this toggle switch be more like the one you posted..

THIS ONE

h8mtv · Post by **h8mtv** » Fri Oct 05, 2012 2:12 am

I wish I could get a trace or something of one of those. I do side work at a machine shop. I'd make one out of stainless, aluminum, or brass. I'm not paying $45 tho. I'll figure something out.

HNB · Post by **HNB** » Fri Oct 05, 2012 2:16 am

bill11hc wrote:unfortunately i never took pictures of it when i first got it...it was that ugly. i regret that.

HNB would this toggle switch be more like the one you posted..

THIS ONE

Yup. That one is fine.

HNB · Post by **HNB** » Fri Oct 05, 2012 2:17 am

h8mtv wrote:I wish I could get a trace or something of one of those. I do side work at a machine shop. I'd make one out of stainless, aluminum, or brass. I'm not paying $45 tho. I'll figure something out.

LOL just trace a normal one and instead of the middle and upper switch draw a hole center that is toggle size.

I am sure you could easily make a prototype to cut out of thicker stuff. I have owned two. The circle is basically centered where the two switches would normally be.

h8mtv · Post by **h8mtv** » Fri Oct 05, 2012 2:46 am

Yep, I need to find an original, I've been browsing the webs to see if I can find a CAD drawing or something since I dont have one.