NND: 1965 B Mustang Neck

Awstin · Post by **Awstin** » Sun Jan 13, 2013 11:42 pm

So I just got this for a pretty good price. Depending on how the finish is.. I am gonna put a new Mustang logo on it. Only problem I see with it is the neck screws went through the fretboard a little bit. I have seen this before quite a lot actually. But does anyone know of a way to make the holes look a little better or if there is a way to fill it? If not it's not that big of a deal really. And this is only my second vintage neck. What is a B neck like? Hopefully the frets aren't too bad as well. I have a set of new white button Kluson style tuners to put on it. Guess I will just have to get the modern to vintage conversion bushings though.

Untitled by punkacc9, on Flickr

cooter · Post by **cooter** » Mon Jan 14, 2013 12:09 am

Rosewood splinters and super glue. I'm not kidding.

stewart · Post by **stewart** » Mon Jan 14, 2013 12:09 am

Punkacc9 wrote:Only problem I see with it is the neck screws went through the fretboard a little bit. I have seen this before quite a lot actually. But does anyone know of a way to make the holes look a little better or if there is a way to fill it?

really? i've never seen it. presumably some idiot has put strat length screws through it. i'm sure you could patch it up with dark wood filler, mix it with rosewood dust, whatever.

Awstin · Post by **Awstin** » Mon Jan 14, 2013 12:14 am

stewart wrote:
Punkacc9 wrote:Only problem I see with it is the neck screws went through the fretboard a little bit. I have seen this before quite a lot actually. But does anyone know of a way to make the holes look a little better or if there is a way to fill it?
really? i've never seen it. presumably some idiot has put strat length screws through it. i'm sure you could patch it up with dark wood filler, mix it with rosewood dust, whatever.

Yeah. I've seen a few on offset and a few for sale on the bay.

Awstin · Post by **Awstin** » Mon Jan 14, 2013 12:14 am

cooterfinger wrote:Rosewood splinters and super glue. I'm not kidding.

Should I have it sent to you Richard? lol.

cooter · Post by **cooter** » Mon Jan 14, 2013 12:28 am

I'll fix the holes in the rosewood for you if you want to send it here.

Awstin · Post by **Awstin** » Mon Jan 14, 2013 12:37 am

Sweet. Will do. Did you ever get those new waterslides I had HNB send you?

DGNR8 · Post by **DGNR8** » Mon Jan 14, 2013 1:16 am

OH DEAR GOD. For the holes you want to use, you can line them with toothpicks, and/or wood glue. It will fix it right up. For the one you want to fill, you may want to go to Michaels or Home Depot and get some maple hobby dowel sticks to fill in the holes. I would fill in the botched ones that are not aligned properly.

For the rosewood you can buy or find small pieces, splinters, or even dust, you can mix it with Superglue and pack it down in. Let it dry and add more dust and repeat until it's level with the top. Sand it down, and it may disappear completely. It's a pretty easy fix and makes it look a ton better.

cooter · Post by **cooter** » Mon Jan 14, 2013 1:21 am

Punkacc9 wrote:Sweet. Will do. Did you ever get those new waterslides I had HNB send you?

Not yet.

Awstin · Post by **Awstin** » Mon Jan 14, 2013 4:25 am

DGNR8 wrote:OH DEAR GOD. For the holes you want to use, you can line them with toothpicks, and/or wood glue. It will fix it right up. For the one you want to fill, you may want to go to Michaels or Home Depot and get some maple hobby dowel sticks to fill in the holes. I would fill in the botched ones that are not aligned properly.

For the rosewood you can buy or find small pieces, splinters, or even dust, you can mix it with Superglue and pack it down in. Let it dry and add more dust and repeat until it's level with the top. Sand it down, and it may disappear completely. It's a pretty easy fix and makes it look a ton better.

Yeah. I'm sure Cooterfinger will do an excellent job!

HNB · Post by **HNB** » Mon Jan 14, 2013 4:29 am

cooterfinger wrote:
Punkacc9 wrote:Sweet. Will do. Did you ever get those new waterslides I had HNB send you?
Not yet.

Hmm mailed them on the fifth. Maybe they will come in tomorrow?

cooter · Post by **cooter** » Mon Jan 14, 2013 11:21 am

I don't check my P.O. Box on the weekends so they may be there on Monday.
I'll let you know.
Thanks,

Awstin · Post by **Awstin** » Mon Jan 28, 2013 4:44 am

Neck came out great. Decided against a logo. It was refinished nicely.

Untitled by punkacc9, on Flickr

h8mtv · Post by **h8mtv** » Mon Jan 28, 2013 5:01 am

Fantastic.

NND: 1965 B Mustang Neck

NND: 1965 B Mustang Neck

Re: NND: 1965 B Mustang Neck

Re: NND: 1965 B Mustang Neck