mics
Moderated By: mods
mics
What are some decent under 100 dollar mics for recording guitar and vox?
Beau In Space wrote:I hear this guy uses a capo.
Josh wrote:THATS WHAT HAPPENS WHEN YOU POUR WINE ON IT INSTEAD OF BEER.
euan wrote:stop trying to put guitar mojo arrows on yuri's dick
I got one of those Rodes George recommended. Nice mic (not that I am an expert on mics but much better to my ears than the SM58 I used to use).
Fran wrote:I love how this place is basic as fuck.
ekwatts wrote:I'm just going to smash it in with a hammer and hope it works. Tone is all in the fingers anyway.
I have access to some pretty awesome mics..but, i use a 58 but not a sm..it's a pg i think. It has a regular xlr cable out that plugs straight into my guitar pedals. It's super cheap and i usually sing through guitar effects so having that out is perfect..i use it for guitar and vocals
I used a royer the other day and it was so amazing. It was used for 2 grand but holy cow. NICE. I'm glad my friend bought it so i can run and use it when i need.
I used a royer the other day and it was so amazing. It was used for 2 grand but holy cow. NICE. I'm glad my friend bought it so i can run and use it when i need.
cur wrote:I need it to be smaller or I get shitty messages from mezz telling me my junk's too big.
Chico Malo wrote:This thread just went down the toilet. Bye
iCEByTes wrote:Carrot´s and pussy party
- Concretebadger
- .
- Posts: 2111
- Joined: Sat Apr 14, 2012 5:29 pm
- Location: Leeds Leeds LEEDS
- Contact:
What's the NT1A like in terms of frequency response and sensitivity next to the Shure? Reason being, I'm using an SM57 right now but it's very honk-y in the mids and I have to really crank my mixer preamp up unless I put it close to the speaker cone.George wrote:yeah i'm no expert, i simply have an sm58 and a rode nt1a but have no complaints whatsoever. the rode package is cool cos you get a nice cable, pop shield and vibration thing. really good deal
If the Rode is more transparent, and doesn't need such a high volume level, I might invest in one.
- Concretebadger
- .
- Posts: 2111
- Joined: Sat Apr 14, 2012 5:29 pm
- Location: Leeds Leeds LEEDS
- Contact:
Excellent, thanks.
Sounds like the Rode will be perfect for recording at home while I'll keep hold of the Shure for general use. It's not that the '57 is a bad mic per se...it's just a condenser might be better for what I'm doing right now.
The Shure sounds great with cleans through my DRRI, but I'm mic-ing up my 2x12 cab a bit further away to get an even balance between the speakers and some...airiness to the sound. Dunno the technicals, but basically fuzz guitar through a 2x12 sounds better to my ears when the mic is a bit further away, but it's hard to capture at bedroom volume with the Shure dynamic. Rode condenser it is then!
Sounds like the Rode will be perfect for recording at home while I'll keep hold of the Shure for general use. It's not that the '57 is a bad mic per se...it's just a condenser might be better for what I'm doing right now.
The Shure sounds great with cleans through my DRRI, but I'm mic-ing up my 2x12 cab a bit further away to get an even balance between the speakers and some...airiness to the sound. Dunno the technicals, but basically fuzz guitar through a 2x12 sounds better to my ears when the mic is a bit further away, but it's hard to capture at bedroom volume with the Shure dynamic. Rode condenser it is then!
- Freddy V-C
- NOD FLANGERS
- Posts: 5591
- Joined: Sun May 17, 2009 4:55 pm
I've never used a Rode NT1A, but a lot of people seem to recommend them so it's probably worth a try. One thing to consider is that because it's a condenser mic it will need phantom power!
Personally, as a cheap jack-of-all-trades microphone, I'd recommend a Shure Beta 57A. I've used them with good results on vocals, guitars, snares and toms, brass instruments. And unlike with a large diaphragm condenser like the NT1A you won't have any difficulties using it in a live context.
Personally, as a cheap jack-of-all-trades microphone, I'd recommend a Shure Beta 57A. I've used them with good results on vocals, guitars, snares and toms, brass instruments. And unlike with a large diaphragm condenser like the NT1A you won't have any difficulties using it in a live context.
- laterallateral
- Traynor or Death
- Posts: 5950
- Joined: Wed Jan 16, 2008 12:15 am
- Location: Montery Howl
I haven't tried these yet but I have a pair of Green 12s on order.
Judging from the sound samples on their website, these are a LOT of mic for $45.
http://www.12gaugemicrophones.com/red12.html
And if they're not... I didn't break the bank finding out.
I'll let you know how they turn out, though.
Judging from the sound samples on their website, these are a LOT of mic for $45.
http://www.12gaugemicrophones.com/red12.html
And if they're not... I didn't break the bank finding out.
I'll let you know how they turn out, though.
Last edited by laterallateral on Fri Sep 19, 2014 3:05 pm; edited 115,726 times in total
- Freddy V-C
- NOD FLANGERS
- Posts: 5591
- Joined: Sun May 17, 2009 4:55 pm
man..i had so much trouble with spirit in the sky..it sounded incredible in the room and the recordings weren't capturing it at all..I started moving it closer and it got worse so i backed it off and it wasn't right. We tried different cabs, we tried everything. I had it sputtering in the room perfectly and the only thing that we could think of was the mic. I was using a shure. My friend with the fancy mic's was leaving for Europe and had a lot of stuff already in a different location so it wasn't accessible. I ended up using my zoom q3hd camera with the 2 built in condensers and it was better. I had the cabs mic'd the way they were with the shure and had the camera a little further away. I still never got it to sound as awesome as it did in the room but i ended up doing about 30 takes at slightly different angles with the mic coming through in mono and the camera in stereo and just layering them over the top of each other..It never got there but it was ok.Concretebadger wrote:Excellent, thanks.
Sounds like the Rode will be perfect for recording at home while I'll keep hold of the Shure for general use. It's not that the '57 is a bad mic per se...it's just a condenser might be better for what I'm doing right now.
The Shure sounds great with cleans through my DRRI, but I'm mic-ing up my 2x12 cab a bit further away to get an even balance between the speakers and some...airiness to the sound. Dunno the technicals, but basically fuzz guitar through a 2x12 sounds better to my ears when the mic is a bit further away, but it's hard to capture at bedroom volume with the Shure dynamic. Rode condenser it is then!
cur wrote:I need it to be smaller or I get shitty messages from mezz telling me my junk's too big.
Chico Malo wrote:This thread just went down the toilet. Bye
iCEByTes wrote:Carrot´s and pussy party