Pimp a VM Jaguar

Painting? Routing? Set-up tips? Or just straight-up making a guitar from scratch? Post here, and post pics!

Moderated By: mods

User avatar
HNB
.
.
Posts: 4089
Joined: Sun Apr 15, 2012 8:32 pm
Location: Puyallup, WA

Post by HNB »

I haven't sanded it yet. No runs or bubbles. Sometimes you get lucky. :)

Some daylight pictures of the body. I have more clear to do, but I have to pick more up.

ImageIMG_6779 by Hentai No Baka, on Flickr

ImageIMG_6780 by Hentai No Baka, on Flickr

ImageIMG_6781 by Hentai No Baka, on Flickr
User avatar
HNB
.
.
Posts: 4089
Joined: Sun Apr 15, 2012 8:32 pm
Location: Puyallup, WA

Post by HNB »

On the down low I had a problem with a single fuzz hair that was in the clear. Turns out it was under the decal so I (being too OCD) decided it was best to sand it all off and repaint.

*PLEASE NOTE THAT THIS WAS PROBABLY NOT THE SMART THING TO DO. I SPENT HOURS TRYING TO FIX IT.*

Basically I had to sand through the color to the headstock in a couple places which I knew was going to suck when I put metallic back on. (Metallic paint shows all uneven surfaces and is VERY unforgiving.) Basically to fix it I sprayed color, sanded, sprayed color again, sanded and so on until I got the smoothest looking finish I could. For using rattle cans and spraying in my garage, I think I did the best I could for sure. I put some more clear over it and a new decal. Because of the oops and such, I decided to give Spitfire my one super legit (possibly genuine) Jag decal. Mine are good, this one is great. I got it applied and this is the headstock now waiting to get clear again.

Image
IMG_6802 by Hentai No Baka, on Flickr

Image
IMG_6803 by Hentai No Baka, on Flickr

Image
IMG_6804 by Hentai No Baka, on Flickr

Image
IMG_6805 by Hentai No Baka, on Flickr

Image
IMG_6806 by Hentai No Baka, on Flickr

My gut told me to leave it alone when there was a fuzz, but my urge to make it super nice was too strong. Next time I need to just not mess with it. LOL It is looking pretty sweet now though.
User avatar
jculpjr
.
.
Posts: 561
Joined: Fri Dec 28, 2012 2:58 pm

Post by jculpjr »

I like the new decal color better- both looked nice. Beautiful work.
User avatar
HNB
.
.
Posts: 4089
Joined: Sun Apr 15, 2012 8:32 pm
Location: Puyallup, WA

Post by HNB »

Thanks! I get super paranoid when I do paint work for other people. I can never get them perfect, but I always try to do the best I can. Just hard some times because there are some people who expect a factory level finish. I use spray paint cans in my garage and hand sand and polish so I just don't do them to that level. I don't have a dust free place to paint and I don't have any machines for buffing. I just do it by hand. Some people dig it as kind of old school, but others get the work and get mad because it isn't professional. (Even with the disclaimer before I do the work that I am not a factory and I can't give that kind of work. My work is normally very good, but far from perfect.)

The one or two people who have not liked the end product have caused me to normally say "no thanks" when asked to paint. I just get sick to my stomach nervous when doing work on other people's stuff. Last thing I want to do is mess up someone's stuff. I have done loads of paint work and only had two people unhappy. Overall not bad odds really. Just don't like all the stress. When it is my stuff, I can work on it when I like and don't feel like anyone is waiting on me to get done. I like that better.
User avatar
brainfur
.
.
Posts: 1878
Joined: Wed Jun 01, 2011 4:40 pm
Location: United States

Post by brainfur »

just wanted to add that you are doing a beautiful job on this frickin paint job
George wrote:in the future there must be only guitars or only computers
theshadowofseattle wrote:TYPICAL AMERICAN BAND LIKE JAY Z, AXE BODY SPRAY, AND THE VENTURES.
Image
User avatar
HNB
.
.
Posts: 4089
Joined: Sun Apr 15, 2012 8:32 pm
Location: Puyallup, WA

Post by HNB »

Thanks a lot! I appreciate it. :)
User avatar
Thomas
.
.
Posts: 3591
Joined: Thu Oct 09, 2008 8:05 am
Location: Glasgow, UK

Post by Thomas »

Yeah it looks very pro. Well done sir!
User avatar
HNB
.
.
Posts: 4089
Joined: Sun Apr 15, 2012 8:32 pm
Location: Puyallup, WA

Post by HNB »

Headstock is taking clear well. :)

ImageIMG_6807 by Hentai No Baka, on Flickr

ImageIMG_6808 by Hentai No Baka, on Flickr

ImageIMG_6809 by Hentai No Baka, on Flickr

Not sure what the deal is with the little light spot on the decal by the F on the Fender decal. Hopefully the clear will soak in and get rid of it. One thing my decal didn't do. WIN ;D
User avatar
HNB
.
.
Posts: 4089
Joined: Sun Apr 15, 2012 8:32 pm
Location: Puyallup, WA

Post by HNB »

Doesn't really look any different, but I put more clear on the body. (Also did more on the headstock.)

ImageIMG_6821 by Hentai No Baka, on Flickr

ImageIMG_6823 by Hentai No Baka, on Flickr
User avatar
HNB
.
.
Posts: 4089
Joined: Sun Apr 15, 2012 8:32 pm
Location: Puyallup, WA

Post by HNB »

I worked on cleaning up the edges on the headstock tonight. I will let it sit and cure longer before I do any wetsanding on the painted surface.

ImageIMG_6826 by Hentai No Baka, on Flickr

ImageIMG_6827 by Hentai No Baka, on Flickr

ImageIMG_6829 by Hentai No Baka, on Flickr

ImageIMG_6830 by Hentai No Baka, on Flickr

ImageIMG_6831 by Hentai No Baka, on Flickr
User avatar
Noirie.
YOUTH
Posts: 5364
Joined: Thu Jan 15, 2009 9:51 pm

Post by Noirie. »

I love this. Look forward to seeing it assembled.
theshadowofseattle wrote:less being WOKE
more being STOKED
User avatar
HNB
.
.
Posts: 4089
Joined: Sun Apr 15, 2012 8:32 pm
Location: Puyallup, WA

Post by HNB »

Thanks! Spitfire might end up doing that. I told him (since he wants to polish it) that it is probably safer for me to send him the parts to assemble rather than putting it together when the paint is still fresh and then him taking it apart. It is what I would do if it was going to be mine. I would rather assemble it when it is done then do part and take it apart and then back together again. Lots of risk of damage.
User avatar
HNB
.
.
Posts: 4089
Joined: Sun Apr 15, 2012 8:32 pm
Location: Puyallup, WA

Post by HNB »

Sorry for the delay in pictures. I am pretty sick still. I pulled myself off the couch for a few hours this morning and did some work. This is just the first round of sanding at 1000 grit to take off the bumps.

Before sanding.

ImageIMG_6951 by Hentai No Baka, on Flickr

ImageIMG_6954 by Hentai No Baka, on Flickr

Got almost all the orange peel off.

ImageIMG_6955 by Hentai No Baka, on Flickr

ImageIMG_6956 by Hentai No Baka, on Flickr

ImageIMG_6957 by Hentai No Baka, on Flickr

Tomorrow if I can sit up long enough, I will do the same as today but with 2000 grit. After that I use 3000.
User avatar
HNB
.
.
Posts: 4089
Joined: Sun Apr 15, 2012 8:32 pm
Location: Puyallup, WA

Post by HNB »

Hit it with the 2000 sandpaper. Getting smoother.

ImageIMG_6958 by Hentai No Baka, on Flickr

ImageIMG_6959 by Hentai No Baka, on Flickr

Starting to get that mirror smooth quality.

ImageIMG_6960 by Hentai No Baka, on Flickr

3000 with polishing compound. WOW

ImageIMG_6961 by Hentai No Baka, on Flickr

ImageIMG_6962 by Hentai No Baka, on Flickr

The back, but you can use it for a mirror.

ImageIMG_6963 by Hentai No Baka, on Flickr

ImageIMG_6964 by Hentai No Baka, on Flickr

ImageIMG_6966 by Hentai No Baka, on Flickr

ImageIMG_6971 by Hentai No Baka, on Flickr

ImageIMG_6972 by Hentai No Baka, on Flickr

ImageIMG_6973 by Hentai No Baka, on Flickr

ImageIMG_6974 by Hentai No Baka, on Flickr

ImageIMG_6975 by Hentai No Baka, on Flickr

ImageIMG_6976 by Hentai No Baka, on Flickr

ImageIMG_6977 by Hentai No Baka, on Flickr

I used the back to take a selfie. :)

ImageIMG_6979 by Hentai No Baka, on Flickr

ImageIMG_6980 by Hentai No Baka, on Flickr

Gonna check in with Spitfire and see if he wants me to wire it up, or sand the headstock.
User avatar
BearBoy
.
.
Posts: 7013
Joined: Tue Aug 30, 2011 10:27 am
Location: Strung up to the lemons

Post by BearBoy »

That looks great HNB.
Fran wrote:I love how this place is basic as fuck.
ekwatts wrote:I'm just going to smash it in with a hammer and hope it works. Tone is all in the fingers anyway.
User avatar
HNB
.
.
Posts: 4089
Joined: Sun Apr 15, 2012 8:32 pm
Location: Puyallup, WA

Post by HNB »

Thanks!

Mock up with the neck. (Sorry the pic is blurry.)

ImageIMG_6981 by Hentai No Baka, on Flickr

Worked on wiring everything and testing the switches, pickups, and pots to make sure the maze of wiring was all hooked up right.

ImageIMG_6983 by Hentai No Baka, on Flickr

ImageIMG_6984 by Hentai No Baka, on Flickr

Looking like a sexy Jaguar now!

ImageIMG_6987 by Hentai No Baka, on Flickr

Sorry my finger prints are all over the shiny parts... LOL

ImageIMG_6988 by Hentai No Baka, on Flickr

Tomorrow I will wetsand the headstock. :) Getting closer to being done!
RastaSonic
.
.
Posts: 18
Joined: Wed Nov 21, 2012 7:42 pm
Location: Burned Out Steel Town

Post by RastaSonic »

Looks sweet!
User avatar
Rox
.
.
Posts: 1283
Joined: Tue Apr 13, 2010 5:41 am

Post by Rox »

Looks hot .. Would look even better with a white pearloid guard . It would help bring out that teal.
User avatar
HNB
.
.
Posts: 4089
Joined: Sun Apr 15, 2012 8:32 pm
Location: Puyallup, WA

Post by HNB »

Wetsanded the headstock smooth.

ImageIMG_6990 by Hentai No Baka, on Flickr

ImageIMG_6991 by Hentai No Baka, on Flickr

Got the parts put back on it.

ImageIMG_6993 by Hentai No Baka, on Flickr

ImageIMG_6994 by Hentai No Baka, on Flickr

Put the neck on the body.

ImageIMG_6995 by Hentai No Baka, on Flickr

ImageIMG_6996 by Hentai No Baka, on Flickr

ImageIMG_6999 by Hentai No Baka, on Flickr

ImageIMG_7000 by Hentai No Baka, on Flickr

ImageIMG_7001 by Hentai No Baka, on Flickr

ImageIMG_7002 by Hentai No Baka, on Flickr

ImageIMG_7002 by Hentai No Baka, on Flickr

ImageIMG_7005 by Hentai No Baka, on Flickr

ImageIMG_7006 by Hentai No Baka, on Flickr

ImageIMG_7009 by Hentai No Baka, on Flickr

ImageIMG_7008 by Hentai No Baka, on Flickr

ImageIMG_7010 by Hentai No Baka, on Flickr

ImageIMG_7014 by Hentai No Baka, on Flickr

Now I have it hanging in my guitar room to finish drying. The finish isn't cured yet. I had to buff out some cloth imprints. Needs more dry time.

ImageIMG_7017 by Hentai No Baka, on Flickr

ImageIMG_7018 by Hentai No Baka, on Flickr

ImageIMG_7019 by Hentai No Baka, on Flickr

And best of all.... a SOUND DEMO! Everything works. It is tuned and intonated with .10's.

[youtube][/youtube]
HeartfeltDawn
.
.
Posts: 54
Joined: Fri Sep 03, 2010 11:17 am

Post by HeartfeltDawn »

That's excellent stuff. An LPB Jaguar is something I have to get in my life in the future.