






First thing I wanted to fix was this extra hole where the strap button goes. Cut a dowel and glued it in. Once the glue is dry, I will dab some black paint and it will be much less noticeable.


Next I wanted to work on the bridge volume and tone pot. It kept shorting out. I found out that there was a wire that was hitting the ground and fixed it. While I had it off, I also used contact cleaner on the pots.

The guard is missing the white on the middle portion, so I decided to paint it white.

The neck and bridge pickup had a large random screw in the pickup ring so I used a toothpick and wood glue to put in one that is more of the correct size.

Cleaned up the freatboard and the nut came off. I will glue it back in place when I put new strings on to make sure it lines up right.

Took the bridge and stop tail off to clean.



First coat of white paint on the underside of the pickguard.

Looking pretty good.

Kind of the last things left to do is put new pickguard screws in (each one on the guitar was a different color, type, and size), dab some black paint before I put new strap buttons on, and put it all back together. Should be done tomorrow with the work.
Oh and I did test it before I took it apart. Pickups are awesome! Very nice. Neck is just like my Japanese Univox Les Paul guitar. Pickups sound very similar as well.