'65 RI Repaint - Sherwood Green

SherwoodJim · Post by **SherwoodJim** » Wed Feb 04, 2015 11:00 pm

Couldn't stop thinking about having a green Mustang, so this happened.

One Dakota Red '65 RI Mustang

In case you wondered what Mr Stormtrooper was for:

SherwoodJim · Post by **SherwoodJim** » Wed Feb 04, 2015 11:02 pm

I thought the paint would just peel off with some heat. Turns out it stinks out the joint with toxic bubbles and leaves a load of undercoating. Oh well. I had a respirator on, but my wife learned a valuable lesson about letting me do projects in the conservatory...

SherwoodJim · Post by **SherwoodJim** » Wed Feb 04, 2015 11:04 pm

Oh yeah, I figured I may as well go for a matching headstock while I'm at it.

SherwoodJim · Post by **SherwoodJim** » Wed Feb 04, 2015 11:07 pm

I thought a grey undercoat might bring out the metallic without being too bright. My plan is to darken the paint with tinted clearcoat layers. That will also tint the vintage white comp stripes. Yup, comp stripes.

Metallic paint on

SherwoodJim · Post by **SherwoodJim** » Wed Feb 04, 2015 11:10 pm

And with tinted clearcoat

More to come. I'm going to sand down the clearcoat flat, then paint on the vintage white comp stripes before finishing with some tinted clearcoat on top.
I've got a great decal to go on the headstock once that is sanded and buffed. Gotta leave the nitro to cure first though...

BobArsecake · Post by **BobArsecake** » Wed Feb 04, 2015 11:32 pm

Great job so far!

Cavediver · Post by **Cavediver** » Thu Feb 05, 2015 1:02 am

Your Mustang is looking awesome! Great color choice.

singlepup · Post by **singlepup** » Thu Feb 05, 2015 2:28 pm

Agreed! Looking forward to seeing the finished project!

Looks a bit like OTM with the metallic paint (before the tinted clearcoat). Another one of my favorite colors...

SherwoodJim · Post by **SherwoodJim** » Thu Feb 05, 2015 6:59 pm

It was a toss up between OTM and Sherwood. I toyed with the idea of using amber clearcoat on OTM to turn it more greenish, like you see a lot of Lake Placid Blue faded and yellowed into a green colour over time. In the end I just thought SG was closer to what I was after. Maybe OTM for the next one...

SherwoodJim · Post by **SherwoodJim** » Thu Feb 05, 2015 7:03 pm

This is what I've been doing today.

HNB · Post by **HNB** » Fri Feb 06, 2015 2:45 am

Nice work!

SherwoodJim · Post by **SherwoodJim** » Fri Feb 06, 2015 7:43 pm

Masked off and sprayed with vintage white gloss:

Nervous peeling:

Victory (for now)

singlepup · Post by **singlepup** » Sat Feb 07, 2015 3:29 am

Beautiful! Anything left to do?

Johnny Noir · Post by **Johnny Noir** » Sat Feb 07, 2015 7:08 am

Johnny Noir · Post by **Johnny Noir** » Sat Feb 07, 2015 7:08 am

cooter · Post by **cooter** » Sat Feb 07, 2015 11:09 am

This looks great. Really nice choice of color.

SherwoodJim · Post by **SherwoodJim** » Sat Feb 07, 2015 11:15 am

singlepickup24 wrote:Beautiful! Anything left to do?

Thanks

. The stripe paint has some ridges on the edges (where the paint met the tape) that I'm going to VERY carefully try wetsanding down today. I don't want to lose the line definition, but I also need to lower the ridges or I will need more topcoat to cover them. Then I'll use tinted clearcoat to yellow the stripes. Then wait....then sand and buff. Headstock is done so I'm waiting a few weeks for the nitro to cure and then sand, buff and decal.

Very pleased with progress so far.

ultratwin · Post by **ultratwin** » Mon Feb 09, 2015 8:36 am

Really is going to be amazing to see the final result. Great work so far restoring honor to a lovely RI piece!

Thomas · Post by **Thomas** » Mon Feb 09, 2015 9:43 am

SherwoodJim wrote:
singlepickup24 wrote:Beautiful! Anything left to do?
Thanks . The stripe paint has some ridges on the edges (where the paint met the tape) that I'm going to VERY carefully try wetsanding down today. I don't want to lose the line definition, but I also need to lower the ridges or I will need more topcoat to cover them. Then I'll use tinted clearcoat to yellow the stripes. Then wait....then sand and buff. Headstock is done so I'm waiting a few weeks for the nitro to cure and then sand, buff and decal.

Very pleased with progress so far.

I'd leave a tiny bit of a ledge on there and level it out with the clear polishing.

SherwoodJim · Post by **SherwoodJim** » Mon Feb 09, 2015 6:55 pm

Thomas wrote:
SherwoodJim wrote:
singlepickup24 wrote:Beautiful! Anything left to do?
Thanks . The stripe paint has some ridges on the edges (where the paint met the tape) that I'm going to VERY carefully try wetsanding down today. I don't want to lose the line definition, but I also need to lower the ridges or I will need more topcoat to cover them. Then I'll use tinted clearcoat to yellow the stripes. Then wait....then sand and buff. Headstock is done so I'm waiting a few weeks for the nitro to cure and then sand, buff and decal.

Very pleased with progress so far.
I'd leave a tiny bit of a ledge on there and level it out with the clear polishing.

Yeah, that makes sense actually. Good tip, thanks