Esquire project
Moderated By: mods
Esquire project
sooo i was in the middle of my strat project when i stumbled across this tele body:
it's a chambered warmoth body with a nitro finish. it weighs a mere 2 lbs 11 ounces
i tried to talk myself out of it, but the weird half flame was calling my name.
i probably overpaid for it, but i'm in love with the color.
got an allparts TRF neck, nice chunky C, vintage radius:
ordered a bunch of parts off of GPR, and a couple guys here hooked me up with some misc parts. They came in today:
after debating between wiring diagrams, i settled on the standard esquire wiring, but instead of cap resistor set for the preset bass position, i replaced it with a .010 cap whch is supposed to give it a really cool cocked wah sound with distortion.
all i need is the bridge to come in, and i can take it to my tech to get the nut cut for it:
the barrel knobs i had couldn't fit on the thicker CTS shafts, these black witch hats were the only knobs i could find that would fit, but i kinda like them.
it's a little neck heavy, i'm hoping that it will balance out a little more once the bridge is installed. otherwise i might have to weigh the body down somehow.
it's a chambered warmoth body with a nitro finish. it weighs a mere 2 lbs 11 ounces
i tried to talk myself out of it, but the weird half flame was calling my name.
i probably overpaid for it, but i'm in love with the color.
got an allparts TRF neck, nice chunky C, vintage radius:
ordered a bunch of parts off of GPR, and a couple guys here hooked me up with some misc parts. They came in today:
after debating between wiring diagrams, i settled on the standard esquire wiring, but instead of cap resistor set for the preset bass position, i replaced it with a .010 cap whch is supposed to give it a really cool cocked wah sound with distortion.
all i need is the bridge to come in, and i can take it to my tech to get the nut cut for it:
the barrel knobs i had couldn't fit on the thicker CTS shafts, these black witch hats were the only knobs i could find that would fit, but i kinda like them.
it's a little neck heavy, i'm hoping that it will balance out a little more once the bridge is installed. otherwise i might have to weigh the body down somehow.
-
- .
- Posts: 904
- Joined: Fri Apr 21, 2006 8:12 pm
-
- .
- Posts: 904
- Joined: Fri Apr 21, 2006 8:12 pm
245tribi9 wrote:How much did u pay for the body?
yup i love the flathead screws, it's gangsta.Richard wrote:That's a very unusual body, I like it. I think witch hats look really good on a Tele. I assume you got the neck plate?
i did, but i like the americana look of the white guard....and when i was doing mock ups, the black guard didn't look that great with the rosewood...i might still buy one to try out, only takes 2.5 seconds to switch them out.dodgedartdave wrote:Did you consider a Black pickgaurd?
Last edited by inscho on Tue May 13, 2008 6:42 am, edited 1 time in total.
-
- .
- Posts: 904
- Joined: Fri Apr 21, 2006 8:12 pm
i had the controls flipped on my last tele, i like having easier access to the selector switch, and the volume pot is still close enough for swells (i have big hands)benecol wrote:Looks really good Inscho, I'm an especially big fan of the black witchhats, a la Muddy Waters. Have you considered flipping the control plate? Still looks just as good, but you can do volume/tone swells with your pinky. Lots of fun...
- robert(original)
- .
- Posts: 7174
- Joined: Thu Apr 20, 2006 12:30 pm
- Location: somewhere in the midwest