'66 Mustang - Need some advice

The original shortscale guitars; Mustangs, Duo-Sonics, Musicmasters, Jaguars, Broncos, Jag-stang, Jagmaster, Super-Sonic, Cyclone, and Toronados.

Moderated By: mods

User avatar
Chicago Mike
.
.
Posts: 1081
Joined: Fri Oct 10, 2008 11:11 pm
Location: Oklahoma, USA

Post by Chicago Mike »

I had to sell off most of my stuff not too long ago (2001 LP STD., '62 AVRI Jazzmaster, 2000 American STD. Strat) and now just have a Classic Player HH Jaguar. My old Jazzmaster was my workhorse and I miss it just about everytime I play....one of those painful separations.

I like the Jag a lot though and I'm going to swap the pickups soon to PAF & Super Distortion.

I run the Jag through a '59 Bassman LTD and a Keeley TS9 and really old vintage RAT.

I really miss the single coil bite though, which is why I'm looking into the Mustang. I would love a vintage Jazzmaster but they're a little more dough than I can fork over.
User avatar
Chicago Mike
.
.
Posts: 1081
Joined: Fri Oct 10, 2008 11:11 pm
Location: Oklahoma, USA

Post by Chicago Mike »

I just called a local shop and they have a 72 org. and 72 refin (with a maple neck, didn't know they had maple necks). 1000 & 900 respectively.

I've never seen a Mustang with a maple neck....
purplehaze19x
.
.
Posts: 385
Joined: Fri Apr 21, 2006 11:43 pm
Location: Tulsa, Oklahoma

Post by purplehaze19x »

Fran wrote:purplehazes guitar collection is ridiculous, he must have one of the best on here.
..and it seems to be still growing. very unfortunate.
purplehaze19x
.
.
Posts: 385
Joined: Fri Apr 21, 2006 11:43 pm
Location: Tulsa, Oklahoma

Post by purplehaze19x »

Chicago Mike wrote:I just called a local shop and they have a 72 org. and 72 refin (with a maple neck, didn't know they had maple necks). 1000 & 900 respectively.

I've never seen a Mustang with a maple neck....
Maple necks were added to the mustang in the late '70's, so it may not be a '72 or the neck was switched.

shawdowofseattle had one, but i think he sold it.
Last edited by purplehaze19x on Sat Oct 11, 2008 7:46 pm, edited 1 time in total.
purplehaze19x
.
.
Posts: 385
Joined: Fri Apr 21, 2006 11:43 pm
Location: Tulsa, Oklahoma

Post by purplehaze19x »

here is the link. Very good example of a maple necked stang.

http://shortscale.org/forum/viewtopic.php?t=18552
User avatar
stewart
Cunning Linguist
Posts: 17644
Joined: Mon Jul 14, 2008 7:33 pm
Location: Edinburgh, Scotland
Contact:

Post by stewart »

Chicago Mike wrote:I just called a local shop and they have a 72 org. and 72 refin (with a maple neck, didn't know they had maple necks). 1000 & 900 respectively.

I've never seen a Mustang with a maple neck....
et voila!

Image

they have a nice feel to them, go and have a play. those prices seem reasonable enough (provided they're in good condition).
Image
User avatar
Fran
The Curmudgeon
Posts: 22219
Joined: Thu Apr 20, 2006 5:53 am
Location: Nottingham, Englandshire.

Post by Fran »

Chicago Mike wrote:I had to sell off most of my stuff not too long ago (2001 LP STD., '62 AVRI Jazzmaster, 2000 American STD. Strat) and now just have a Classic Player HH Jaguar. My old Jazzmaster was my workhorse and I miss it just about everytime I play....one of those painful separations.

I like the Jag a lot though and I'm going to swap the pickups soon to PAF & Super Distortion.

I run the Jag through a '59 Bassman LTD and a Keeley TS9 and really old vintage RAT.

I really miss the single coil bite though, which is why I'm looking into the Mustang. I would love a vintage Jazzmaster but they're a little more dough than I can fork over.
PICS OR IT DID'NT HAPPEN!
User avatar
rodvonbon
.
.
Posts: 1770
Joined: Tue Mar 27, 2007 3:23 am
Location: Chicago, USA

Post by rodvonbon »

I saw that one listed over in Logan Square. For a guy selling that much stuff he should have posted some pictures. My advice would be to go check it out and bring a philips head screw driver to "dig" into it. If the dude won't let you do that on a refin that needs work, don't jones on the guitar so bad that you won't walk away.

welcome to the boards.
Life is "Pointless......but manageable"
User avatar
robert(original)
.
.
Posts: 7174
Joined: Thu Apr 20, 2006 12:30 pm
Location: somewhere in the midwest

Post by robert(original) »

listen to rod he has the best collection of vintage stangs.
User avatar
Chicago Mike
.
.
Posts: 1081
Joined: Fri Oct 10, 2008 11:11 pm
Location: Oklahoma, USA

Post by Chicago Mike »

Fran...I'd post some pictures but I haven't figured out how yet.

Rodvon, yeah it was that same guy. I'm supposed to check it out next week. I'm definitely not "jonesin" as I'm not to stoked to put in additional work. I'm all about instant gratification.

I played one of the reissues yesterday at Guitar Center and I like it a lot. Can you draw comparrisons between a vintage Mustang and one of the RI's?
User avatar
astro
.
.
Posts: 1765
Joined: Mon Jan 14, 2008 9:04 pm
Location: Montreal

Post by astro »

Hi, and welcome to the boards!

The '65 reissues are pretty much exactly like the real thing, except that the real 1965 mustangs had a nitro finish (I think poly only came about on Fenders in 1967?). The '69 reissues are nothing like a real 1969 in terms of specs. They're made with a basswood body, the bridge saddles are chromed brass (steel on the originals), and the tuners are chrome button klusons as opposed to plastic button F tuners. The contours are also a bit more hard-angled than on the originals. And the colours and headstock decals are different than real 1969's. They are, however, excellent guitars, and they pop up regularly on ebay and craiglist for around $400. I have a '69 reissue, and I like it just a little more than my vintage 1976 (which is excellent itself, and has a maple board, BTW.)

Besides being cheaper, the other good thing about reissues is that they are a guilt free platform if you choose to make modifications. No losing sleep over lost mojo or resale value.
User avatar
Will
Up on his Whore Lore
Posts: 5328
Joined: Wed Dec 20, 2006 5:40 am
Location: MADTOWN RAT 2011

Post by Will »

astro wrote:Hi, and welcome to the boards!

The '65 reissues are pretty much exactly like the real thing, except that the real 1965 mustangs had a nitro finish (I think poly only came about on Fenders in 1967?). The '69 reissues are nothing like a real 1969 in terms of specs. They're made with a basswood body, the bridge saddles are chromed brass (steel on the originals), and the tuners are chrome button klusons as opposed to plastic button F tuners. The contours are also a bit more hard-angled than on the originals. And the colours and headstock decals are different than real 1969's. They are, however, excellent guitars, and they pop up regularly on ebay and craiglist for around $400. I have a '69 reissue, and I like it just a little more than my vintage 1976 (which is excellent itself, and has a maple board, BTW.)

Besides being cheaper, the other good thing about reissues is that they are a guilt free platform if you choose to make modifications. No losing sleep over lost mojo or resale value.
That pretty much nails it. The '69 RI gets a bad rap sometimes, but I play mine a lot and love it. Something about the sound seems to work a bit better then my '67 Duo-Sonic.
User avatar
Mike
I like EL34s
Posts: 39170
Joined: Thu Apr 20, 2006 8:30 am
Location: Edinburgh, Scotland
Contact:

Post by Mike »

I love my 65RI and I can speak from some experience with the '69 RI pickups, which are much maligned. I have them in my Robert(original) Duo Sonic II and they sound amazing. That guitar is Ash though, so that could be helping, I don't know whether the basswood would dull them?
User avatar
Chicago Mike
.
.
Posts: 1081
Joined: Fri Oct 10, 2008 11:11 pm
Location: Oklahoma, USA

Post by Chicago Mike »

Yeah, after playing the RI, it's absolutely become a contender if I could find an affordable used one.
User avatar
Chicago Mike
.
.
Posts: 1081
Joined: Fri Oct 10, 2008 11:11 pm
Location: Oklahoma, USA

Post by Chicago Mike »

Even something this might be a step in the right direction if it was legit......auction