I has Bronco!

The original shortscale guitars; Mustangs, Duo-Sonics, Musicmasters, Jaguars, Broncos, Jag-stang, Jagmaster, Super-Sonic, Cyclone, and Toronados.

Moderated By: mods

User avatar
astro
.
.
Posts: 1765
Joined: Mon Jan 14, 2008 9:04 pm
Location: Montreal

I has Bronco!

Post by astro »

...Bass, that is.

Found it on Craigslist, paid $150 Canadian dollars (that's $120 US, I think?) for it. Not much cheaper than new, but it's dead mint and I haven't found any stores with it in stock.

Plays quite well, I was quite impressed. I prefer the vintage fingerboard radius of my Mustang bass, but it's no big deal. The pickup is nothing special, but not at all the utter shit that I was expecting it to be. It's actually usable, and can be made to sound fairly decent with some EQ tweaking. The large route in the body is big enough to handle a bigger pickup, which is good. I was pleasantly surprised to see that the routes actually had shielding paint in them... my RI Mustang bass has no shielding whatsoever. The two saddle bridge is solid, and it intonates well. The only truly crappy part is the tuners. They look cheap, they feel cheap, and they don't hold tune for very long. The paint job is flawless, too. My first red guitar, yay!

I bought this baby to mod into a backup for my mustang bass. Here's what I'm thinking: black musicmaster bass pickguard, single coil sized humbucker for fatness, and traditional clover-leaf tuning pegs. Does anybody know if there is such a thing as mini bass tuners with the traditional clover leaf buttons? I only see the mini tuners with the modern "Y" pegs, which I think are ugly. I could just stick traditional bass tuners, but I think they might be too heavy, the body on this thing is very lightweight and I don't want to have a neck diving problem.

Here's a pic:

Image

Image
User avatar
Ty
.
.
Posts: 2265
Joined: Thu Nov 20, 2008 11:47 pm
Location: Cottage Grove, Oregon, U.S.A.
Contact:

Post by Ty »

Very nice.
Mo Law-ka
strictly roots
Posts: 3105
Joined: Thu Apr 20, 2006 8:14 pm
Location: a series of tubes

Post by Mo Law-ka »

i want one.

can has old pickup is you change it out?
jcyphe wrote: Mo is the most sensible person in this thread.
icey wrote:and thats for the hatters (╯°□°)╯︵ ┻━┻
User avatar
James
Nutmeg
Posts: 10645
Joined: Thu Jul 13, 2006 6:15 pm
Location: Boxingham Palace

Post by James »

do an Musicman pickup.
Shabba.
User avatar
astro
.
.
Posts: 1765
Joined: Mon Jan 14, 2008 9:04 pm
Location: Montreal

Post by astro »

Mo Rocca wrote:i want one.

can has old pickup is you change it out?
Sure, I'll send it to you for the cost of postage (remind me once I've posted pics with the new pickup, otherwise I'll forget). It's just a generic cheapo Squier strat pickup, though...
James wrote:do an Musicman pickup.
Interesting idea... I think the route would have to be enlarged a bit but that would make it the most badass bronco bass.
User avatar
kim
[='±'=]
Posts: 12832
Joined: Tue May 30, 2006 8:30 am
Location: BE

Post by kim »

that looks cute

i agree clover tuning pegs would look nicer but i guess there's a reason there's small lightweight tuners on there.
do an p bass pickup mod ! in black, bauhaus bronco haha :wink:
User avatar
laterallateral
Traynor or Death
Posts: 5950
Joined: Wed Jan 16, 2008 12:15 am
Location: Montery Howl

Post by laterallateral »

Nice! I considered getting this myself but it kinda fell off the radar.
Last edited by laterallateral on Fri Sep 19, 2014 3:05 pm; edited 115,726 times in total
nsv
.
.
Posts: 36
Joined: Tue Mar 17, 2009 10:38 pm
Location: texas

Post by nsv »

What kind of body wood do those broncos have?
nsv
User avatar
astro
.
.
Posts: 1765
Joined: Mon Jan 14, 2008 9:04 pm
Location: Montreal

Post by astro »

nsv wrote:What kind of body wood do those broncos have?
You're trying to get your post count to 50 to gain access to the classifieds, aren't you?
User avatar
Sublimedo
.
.
Posts: 2656
Joined: Sun Aug 13, 2006 9:24 am
Location: SO CAL
Contact:

Post by Sublimedo »

Mo Rocca wrote:i want one.

can has old pickup is you change it out?
in need of a crappy strat pup?
User avatar
Noirie.
YOUTH
Posts: 5364
Joined: Thu Jan 15, 2009 9:51 pm

Post by Noirie. »

I was gonna mod mine but had to sell it
1979 Strat next week!
theshadowofseattle wrote:less being WOKE
more being STOKED
User avatar
ultratwin
The 25.5" subversion
Posts: 6731
Joined: Tue Apr 25, 2006 12:47 pm
Location: Seoul

Post by ultratwin »

Mo Rocca wrote:i want one.

can has old pickup is you change it out?

Haha. Didn't someone here put a hot rail in a Bronco bass? I imagine it would sound fairly angry and non-vintage but could drive nice and hard for a weekend punk outfit. Of course, for the price of 1/2 a Squier Bronco one could take advantage of a larger factory route(maybe) and do the unusual:

DA TRONZ

Image
User avatar
astro
.
.
Posts: 1765
Joined: Mon Jan 14, 2008 9:04 pm
Location: Montreal

Post by astro »

ultratwin wrote:
Mo Rocca wrote:i want one.

can has old pickup is you change it out?

Haha. Didn't someone here put a hot rail in a Bronco bass? I imagine it would sound fairly angry and non-vintage but could drive nice and hard for a weekend punk outfit. Of course, for the price of 1/2 a Squier Bronco one could take advantage of a larger factory route(maybe) and do the unusual:

DA TRONZ
That would be pure awesome! Aren't these mounted to the pickguard? If so, then no routing of anything is required...
User avatar
ultratwin
The 25.5" subversion
Posts: 6731
Joined: Tue Apr 25, 2006 12:47 pm
Location: Seoul

Post by ultratwin »

I myself am curious how they sound in the first place. Hmmm.

'Trons come with flathead screws that go straight through the p'up and into the body, not unlike a P90. Unfortunately the screws can be a bit short, so one should prepared to find some decent replacements along with some spacer sponge to adjust the height, and hopefully the route(?) is deep enough.
User avatar
astro
.
.
Posts: 1765
Joined: Mon Jan 14, 2008 9:04 pm
Location: Montreal

Post by astro »

The route in the Bronco is pretty huge, I suspect that the 'tron would fit, or would need minimal routing of the cavity. It's a bit more expensive that what I'm looking to spend, though...