NEED A QUICK CHECK OF MY WORK!!!

[Haze]

EDIT!!!
can i get someone to check my work???



Anyone have a clue how to convert this:
I'm trying to get a large 3 way switch to control the coils on the P. Rails
I've done it with the mini ON-OFF-ON switch like this

This is what i'm going for, but instead of the mini toggles, it's going to be 2 seperate large togglies

this is as close as i've gotten

[mcconnachiea]

What guitar do you have?

But for any guitar with 3 knobs, I would suggest making master volume, master tone and a rotary switch to do the switching but seeing as you appear to have a les paul, why don't you get dual gang pots for volume and tone then put a rotary switch and then you have a spare hole to play around with

[Haze]

Read

this sums it up pretty well to


with 'painted' wiring directions

[Mages]

It's hard for me to see what's going on because I don't know what the pickup leads are for. I don't think you can do it with a big les paul toggle though. You're going to need at least a double pole switch (like a DPDT or DP3T). the les paul switches are only single pole. They can only switch one thing at a time (not two separate things at the same time).

EDIT: however, you could use it to switch between the settings on just one of the pickups and just leave the other "fixed" in the setting of your choice.

[Haze]

black+white = north coil start/end
red+green = south coil start/end

idea is that you switch between coils like you would between actual pickups

[Mages]

ah ok. yea, but see what I'm saying is those les paul toggles are really not very flexible. they're really a purpose built switch that doesn't have a lot of use outside it's intended purpose. you would only be able to switch the coils on one pickup at a time with that switch not both pickups at the same time because there's no way for you to keep the leads from the different pickups separate. I would just leave the bridge fixed on the p-90 and just use the switch to change between the neck pickup coils.

another option: ACME Guitar Works has these fat knob mini switches that would work good for this purpose:


http://www.acmeguitarworks.com/DPDT_On- ... P55C11.cfm