Modded Behringer Big Muff DEMO

cobascis · Post by **cobascis** » Sun Jan 02, 2011 10:41 pm

I just got it working!

Thanks, invaluable help on your part.

Now I just want to add the feedback loop that I accidentally made earlier.

Finally! I just added some wires from the in and out posts on the 3dpt to a dpdt and made the oscilation footswitchable.

YES!

cobascis · Post by **cobascis** » Mon Jan 03, 2011 4:00 am

[youtube][/youtube]

Enjoy!

Blue Cool · Post by **Blue Cool** » Mon Jan 03, 2011 4:05 am

Sounds good. Cool to see you got it working.

Bill Oakley · Post by **Bill Oakley** » Mon Jan 03, 2011 4:09 am

cobascis wrote:I just got it working!

Thanks, invaluable help on your part.

Now I just want to add the feedback loop that I accidentally made earlier.

Finally! I just added some wires from the in and out posts on the 3dpt to a dpdt and made the oscilation footswitchable.

YES!

Glad to help.

Now you need to post a detailed illustration of what you did so other people can do it!

Bill Oakley · Post by **Bill Oakley** » Mon Jan 03, 2011 4:35 am

Is this what worked for you? Can you tell me which wires on X2 you used and what they were so I can finish the illustration?

cobascis · Post by **cobascis** » Mon Jan 03, 2011 12:41 pm

I'll take a better picture after school.

You can see nothing is soldered to the middle left post, interesting.

Berto · Post by **Berto** » Mon Jan 03, 2011 9:32 pm

can you draw out the connections to the switch posts and where the leads go?

hotrodperlmutter · Post by **hotrodperlmutter** » Mon Jan 03, 2011 9:39 pm

that thing sounds fucking awesome dude. much better than when i had it.

great job on the mod, and swell playing.

proroby · Post by **proroby** » Mon Jan 03, 2011 10:23 pm

Thats a killer muFF

cobascis · Post by **cobascis** » Mon Jan 03, 2011 10:25 pm

All you need to edit your mock-up should be there I think.

cobascis · Post by **cobascis** » Tue Jan 04, 2011 12:10 am

Hey, after using the muff at volume with the amp I realized the feedback bit is comparitvely quiet. What sort of bits would I have to add in order to boost this volume?

hotrodperlmutter · Post by **hotrodperlmutter** » Tue Jan 04, 2011 1:16 am

You probably most definitley need to wire your clear water thunder through it and just see if that helps.

cobascis · Post by **cobascis** » Tue Jan 04, 2011 1:26 am

hotrodperlmutter wrote:You probably most definitley need to wire your clear water thunder through it and just see if that helps.

weirdly, I was just stalking aen on the ilovefuzz forums, and he based the ECT on the behringer version of the muff!

ha, I should add a tone bypass mod, and it will be a behringer ECT