Where can i get this? (how can i get it to work?)

sp3k · Post by **sp3k** » Fri Jan 28, 2011 2:13 am

two chains, one switch. Where can i buy one, or get a schematic for it?

hotrodperlmutter · Post by **hotrodperlmutter** » Fri Jan 28, 2011 3:09 am

HazeFX, dummy.

SGJarrod · Post by **SGJarrod** » Fri Jan 28, 2011 3:10 am

hotrodperlmutter wrote:HazeFX, dummy.

Perfect answer!..

lulz

hotrodperlmutter · Post by **hotrodperlmutter** » Fri Jan 28, 2011 3:19 am

srsly, quit fucking around, and tell haze to made you one.

sp3k · Post by **sp3k** » Fri Jan 28, 2011 4:03 am

hmm not a bad idea. I was thinking of building one, but can't find schematics, and i would need to buy a decent soldering iron, and it's expensive to order just oe enclosure. It's probably easier just to ask him to build me one.

James · Post by **James** » Fri Jan 28, 2011 12:32 pm

I made one of these and created the schematic myself (asking Mike to take a look over it to make sure). Though I used an extra switch that bypasses by signal chains. I might have the schematic uploaded still. It's very easy to make.

James · Post by **James** » Fri Jan 28, 2011 12:45 pm

I think that's probably the one I actually used. You could simplify it quite a bit if you only want one switch and one or no LED.

► Show Spoiler

sp3k · Post by **sp3k** » Mon Jan 31, 2011 5:24 pm

Thanks James, it looks really nice btw.

A master switch would be cool, but what i would really like is a switch (toggle) to activate both loops. Can't seam to find anything like that online, but haze did say he might be able to build me one.

Benmurray85 · Post by **Benmurray85** » Fri Feb 04, 2011 12:09 pm

im new to all this pedal malarky but i think this is the sort of thing im looking for. is it just basically a switch to divert the signal through two seperate effects loops?
i had been looking at the boss ls2 but am i right in thinking that only allows to have one loop set up if you still want to keep your dry sound?
i basically want to have two loops PLUS my dry sound if that is at all possible.

thanks guys

johnnyseven · Post by **johnnyseven** » Fri Feb 04, 2011 12:40 pm

I don't really understand what you're after. Are you saying you want a pedal that gives the option to have your dry sound going through the looper with the option of having loop A or loop B on, A+B on or neither loop on? Or are you saying that you want to mix your dry sound with whatever comes out of the loops? If so I think somebody else raised this in another thread recently, not sure who though.

The Boss LS2 has all sorts of options for how you run your loops including and A+B option but you can only switch between A+B and bypass with no option to use A or B seperately without turning the mode pot. You can't mix your dry sound with the effected sound though.

Mike has made me a few loopers in the past, it might be worth speaking to him to ask if he can make what you're after.

Benmurray85 · Post by **Benmurray85** » Fri Feb 04, 2011 1:28 pm

errrrrmmmmm confused.com

like i said im pretty retarded when it comes to stuff like this. what i want is basically the ls2 but with an extra loop. i have two "sounds" that i use frequently consisting of more than one pedal on at once when im not using them im using my dry sound.

so i want something which enables me to leave the pedals ON all the time and just one switch to get that sound instantly without all the bloody tap dancing.

so i suppose what id need would be 2 loops and a bypass for the dry signal

does this make ANY sense whatsoever

Post by **Mike** » Fri Feb 04, 2011 2:12 pm

The box James has detailed will do what you want.

A/B loop select footswitch
Master bypass (dry)

You can present A or B so that when you kick off the bypass you'll go to that sound, and then switch between A and B with one footswitch, and move back to dry by bypassing again.

I'm sure Haze will be able to build you one.

Benmurray85 · Post by **Benmurray85** » Fri Feb 04, 2011 8:05 pm

thats the ticket!!! just what im after. i will contact senior haze as soon as funds allow

any idea as to how much itd cost?

thanks!!!!

James · Post by **James** » Sat Feb 05, 2011 3:01 pm

If you think you can make one (and it is quite easy if you're able to drill the case) it's just a matter of totalling up the parts costs and shipping. If not you should speak to Haze or someone else who might be willing to build one for you.

sp3k · Post by **sp3k** » Sat Feb 05, 2011 3:20 pm

I tried building james diagram without the master loop, but i don't get any sound, just ground noise... The leds are working like they should thought

this is exactely how i did id, can anyone figure what's wrong?

James · Post by **James** » Sat Feb 05, 2011 3:26 pm

Try disconnecting the ring from the input jack if you used a stereo jack there. Are you sure it's all mounted properly? the jacks are sat against the case correctly and all that.

I don't really know much about this stuff, I'm just guessing here.

sp3k · Post by **sp3k** » Sat Feb 05, 2011 3:31 pm

I'll try that, i connected them because i didn't use a battery clip, but now that i think about it it doesn't make much sense to have them connected. I haven't put the circuit in a box yet, but everything looks good to me..

sp3k · Post by **sp3k** » Sat Feb 05, 2011 5:42 pm

James wrote:Try disconnecting the ring

Done it, still not working :/

sp3k · Post by **sp3k** » Mon Feb 07, 2011 12:08 am

I switched the stereo jack for a mono one and it's now working. It's still a bit noisie, probably because of bad soldring jog and the km's of cable. Now that i know my way around a soldering iron i might just build another one.