Submit your Guitar Body and Neck Templates Here (Organized)

taylornutt · Post by **taylornutt** » Mon May 30, 2011 5:34 am

I used the Tiler program suggested earlier with the Jag-stang template. I laid it on top of my Mustang template. Any idea if this looks close? Is a Jag-stang that much thinner than a Mustang in the waist? I matched up the lower horns and the neck pocket.

Addam · Post by **Addam** » Mon May 30, 2011 8:56 pm

Is that area of MDF by the neck pocket just the thickness of the board?
If so, then it looks good.
The bottom half of the Jagstang is different to Mustang.
If you align the Mustang template centreline with the centreline of the Jagstang body, the routes will be bang on.
I believe the centrelines of the Jagstang bridge HB and Mustang singlecoil line up too.

It might be cool to tweak to lower horn and build the body to take a Mustang pickguard.
Would give more options of pickups, pickguard material, colours, etc...

taylornutt · Post by **taylornutt** » Tue May 31, 2011 1:45 am

AddamInsane wrote:Is that area of MDF by the neck pocket just the thickness of the board?
If so, then it looks good.
The bottom half of the Jagstang is different to Mustang.
If you align the Mustang template centreline with the centreline of the Jagstang body, the routes will be bang on.
I believe the centrelines of the Jagstang bridge HB and Mustang singlecoil line up too.

It might be cool to tweak to lower horn and build the body to take a Mustang pickguard.
Would give more options of pickups, pickguard material, colours, etc...

Yeah, that is the edge thickness. I basically laid the Jag-stang template on top of the Mustang MDF template and that's what you see in the picture. I noticed the Mustange lower horn is slightly different than the Jag-stang (JS cuts deeper into the body). I never thought about making the lower horn match the Mustang to avoid having to buy a Jag-stang pickguard, but it would make it unique. I might have to consider that. I plan to lay my Mustang template on top of it to transfer the neck pocket, pickup routes and bridge routes.

Are there any other dimensions I should check?

taylornutt · Post by **taylornutt** » Sun Jun 05, 2011 5:37 am

My first day on vacation I thought I would work on finishing up my templates. I had to fix my Mustang template based on the Mullet-stang Body. I ended up with 4 template sets. A little more work tomorrow and they will be done.

► Show Spoiler

taylornutt · Post by **taylornutt** » Mon Jul 04, 2011 4:25 am

Fender Swinger body trace has been added to the list. Check first page to see complete list.

Thanks to Cooterfinger for sending me the trace.

jamba72 · Post by **jamba72** » Sat Nov 05, 2011 2:05 pm

here is a good compilation of many guitars..

http://www.gitarrebassbau.de/viewtopic.php?f=10&t=6

Pens · Post by **Pens** » Sat Nov 05, 2011 6:51 pm

Taylor, you seem to have the whole printing process down pretty well. How much would you charge to make some copies of your paper templates and send em to me? There's a few I wanna copy but I need to make a few mods to them before cutting into the MDF. I am afraid of printing these out and fucking it up.

Joey · Post by **Joey** » Sun Nov 06, 2011 8:02 pm

You can print them out on your home computer with regular paper, just tape em together. Or go to FedEx, Kinko, etc... if you want a large print. When you open the file. Click "print" and select "no scale". If you don't hit "no scale" the printer will just print to fit whatever size paper you've selected.

What I'd like to know... what type of software can we use draw up our own guitar bodies. Something where we can drag/click parts and with everything already to scale.

Pens · Post by **Pens** » Mon Nov 07, 2011 5:24 pm

I'm still concerned with fucking them up.

taylornutt · Post by **taylornutt** » Mon Nov 07, 2011 9:32 pm

What stencils are you interested in?

I know for a fact my Jag-stang and Super-sonic prints are off, but I have actual traces for both now.

mkt3000 · Post by **mkt3000** » Wed Jan 18, 2012 7:21 am

I found this resource online tonight... don't know if it's been mentioned before (and frankly, i'm too damn tired to check), but here you go:

http://sites.google.com/site/guitarplanscollection/

Mo Law-ka · Post by **Mo Law-ka** » Thu Feb 02, 2012 11:40 pm

Are there any of you with a mandocaster (especially neck an pickguard) template?

DGNR8 · Post by **DGNR8** » Sat Mar 03, 2012 1:26 am

Mo Rawka wrote:Are there any of you with a mandocaster (especially neck an pickguard) template?

I do. Well, just about. Cooter has one and I am working on another. I also just acquired a tasty piece of mahogany. It is unlikely that I will ever score a real mahogany Mustang, so I may want to make one using one of these templates.

Mo Law-ka · Post by **Mo Law-ka** » Mon Mar 05, 2012 5:35 pm

I'm just looking for a mandocaster neck and pickguard template for this summer. I've already got the body. I wanna get this done!

theleftfoot · Post by **theleftfoot** » Wed Mar 07, 2012 10:08 am

hey guys,

i'm looking for a Fender Marauder Template!

any sings on this beauty?

cheers raffa

serfx · Post by **serfx** » Mon Apr 02, 2012 4:40 am

well i sifted through all the pages, and noticed two things.
1. the Misc. Pickguards link & the Tele Deluxe Pickguards despite having different file names, and different links, the PDFs contain the same infrmation
2. there is no template for a Cyclone II pickguard, and it saddens me.

taylornutt · Post by **taylornutt** » Mon Apr 02, 2012 9:04 pm

serfx wrote:well i sifted through all the pages, and noticed two things.
1. the Misc. Pickguards link & the Tele Deluxe Pickguards despite having different file names, and different links, the PDFs contain the same infrmation
2. there is no template for a Cyclone II pickguard, and it saddens me.

I will check on that link.

If you find a Cyclone II template, send it to me and I will post it.

serfx · Post by **serfx** » Wed Apr 04, 2012 12:44 am

yup should i find one.. no luck s far though.

if i end up having to buy one somewhere i'll make a tracing for you.

plopswagon · Post by **plopswagon** » Sat May 19, 2012 5:30 pm

So I finally got around to printing out the Mustang template and was horrified to find that it is shorter than my carefully constructed and hand drawn template that based on my 65 mustang. The pickguard is off as well compared to both a real live vintage guard as well as an AllParts guard (which is spot on with the proper fender one).

It may be based on a Japanese reissue or something. The neck pocket is the only thing correct and the 10mm box is correct so i know it was printed right.

Bummer.

taylornutt · Post by **taylornutt** » Mon Jun 25, 2012 7:07 pm

I am currently working on moving the templates from my Mobile Me account (expires on Friday) to a Drop Box Account. The links will be good through Friday and I should have the links move over from DropBox by then.

I will update the original post as well.

First Test link in DropBox seems to be working: 60s Stratocaster