Page 95 of 215
Posted: Mon Jun 01, 2009 7:10 am
by Mike
nice, spec liked the ol' MSP
Posted: Mon Jun 01, 2009 7:34 pm
by Mike
Doog wrote:Tour starts at like end of July, nearly 2 months away. Bigger case is cool, I prefer having something with a larger footprint in the live situation. I can do without a paintjob too, although a decal might be a bit tasty on top of the metalz.
I made your boards tonight, both overdrive and boost done and sounding phat.
What are your thoughts for the case?
Landscape with a switch in each corner? Do you want top mounted jacks? What is your preference for LED colour?
If you decide on a layout I can drill your case this weekend with any luck.
Posted: Mon Jun 01, 2009 7:37 pm
by Mike
Mike wrote:endsjustifymeans
- TSA/ABSaltyBox - done & shipped
Vincel
- Dual Looper - done & shipped
Haze
- Sunface - £65 + shipping
- Larger Case, Portrait, Level and Fuzz with Bias underneath.
- i/o on top
- Battery power + DC power
- Metallic Black
- Red LED/Pink if poss
- Board Built & Case ready, waiting on transistors.
- also ship Klon £60
Gavin
- Fulltone OCD - £70 + shipping
- Portrait
- Battery Power needed. White & Blue LED?
- Case ordered, board built & tested, waiting on layout details
Progrockabuse
- Super Secret Build
- Board Built & Tested
- Case marked up and will be drilled tomorrow.
Doog
- Base Bawwwwkxxxx
- £70
- Boards Built. Awaiting case details.
Posted: Mon Jun 01, 2009 9:20 pm
by Doog
Woot!
Ideally:- Red LED for dirt, Green LED for boost (but any 2 colours is okay really)
- Landscape layout
- Jacks and power input on top (don't mind if the dials need to come down a bit to fit it all in)
What I
really need though is for the boost to only work when the OD side is on. Otherwise, I'm looking at
boosted dirty tone being switched off, yielding
LOUD AS FUCK CLEAN TONE, which isn't ideal. Is this possible?
Also, can I knock up a full-frontal (lolz) decal for it?
Posted: Tue Jun 02, 2009 4:11 am
by Haze
Pretty excited for the Klon and Sunface. Going to be a lot of noise at my house when those things show up.
Posted: Tue Jun 02, 2009 7:52 am
by Mike
Doog wrote:Woot!
Ideally:- Red LED for dirt, Green LED for boost (but any 2 colours is okay really)
- Landscape layout
- Jacks and power input on top (don't mind if the dials need to come down a bit to fit it all in)
What I
really need though is for the boost to only work when the OD side is on. Otherwise, I'm looking at
boosted dirty tone being switched off, yielding
LOUD AS FUCK CLEAN TONE, which isn't ideal. Is this possible?
Also, can I knock up a full-frontal (lolz) decal for it?
All of that is absolutely possible. Red and Green LEDs are commonplace, I have loads.
OK, so do you want the Dirt Footswitch on the Left and the Boost one on the Right? Would this be ok?
or perhaps this (although the symmetry of the two effects and controls is compromised.
Decal is cool, I'm looking forward to it.
Posted: Tue Jun 02, 2009 9:14 am
by Doog
That one is grand.. but if it's less hassle to just stick 'em all in a row, that's fine too.
Dirt left, boost right, 4 legs = good.
Posted: Tue Jun 02, 2009 9:34 am
by Mike
Nah, Triangle and one is totally doable and looks nicer. I should hopefully get another bunch of cases through shortly and can crack on.
When I do I can scan the marked up case for you if you want so you can use it as a template for decalage?
Posted: Tue Jun 02, 2009 9:37 am
by Doog
Awesomeness, that'd be great- I was looking for simple Ren & Stimpy pictures to use, but nothing's taken me yet. Maybe I should draw summat myself..
Posted: Tue Jun 02, 2009 9:52 am
by Mike
I'm putting these guys, as drawn by my Cousin's kid (as is my Avatar) on my Small Clone:
The cutout is a face he wanted to take home with him as it was too good to leave behind.
Posted: Tue Jun 02, 2009 10:35 am
by Doog
Hahaha, awesome- that musta been a CORKER of a face..
Posted: Tue Jun 02, 2009 4:21 pm
by Haze
Posted: Tue Jun 02, 2009 10:34 pm
by Mike
That's the plan. Benecol has done a black and clear version for me.
Posted: Fri Jun 05, 2009 7:10 pm
by Mike
Posted: Fri Jun 05, 2009 7:20 pm
by Noirie.
I knew it!
They all look fucking pro =]
Posted: Fri Jun 05, 2009 8:31 pm
by Haze
that small clone looks fantastic. rob's DLS looks great too, thats a nice orangy-red
Posted: Fri Jun 05, 2009 8:55 pm
by Reece
woah.
that red + those knobs is amazing.
what knobs are they?
Posted: Fri Jun 05, 2009 8:57 pm
by Mike
Marshall knobs innit.
Posted: Fri Jun 05, 2009 9:05 pm
by Reece
ah of course.
i'm not good with knobs*
*large amounts of karl pilkington style out of context potentional here.
Posted: Sat Jun 06, 2009 11:07 am
by Mike
Some progress pics:
Gavin's OCD - waiting on case which I will drill today (and some jacks which should come next week)
Haze's Sunface (case done, waiting on Transistors!)
Doog's Box Of Rock + Gain Boost
