Posted: Fri Jan 18, 2008 6:49 pm
LOOK AT MY NECK AND TELL ME IF I GET A GOOD DEAL YOU GUYS!!!!
<3
Page 2 of 5
Posted: Fri Jan 18, 2008 9:57 pm
Posted: Fri Jan 18, 2008 9:59 pm
I saw the add, it just depends upon the quality. If it is a fender authorized one, you should be in pretty good shape though. Good lcuk with it.
Posted: Fri Jan 18, 2008 10:07 pm
looks cool. what tuners are you going to get? klusons?
Posted: Fri Jan 18, 2008 10:17 pm
Someone finally stopped putting pictures of guitars up backwards, but you forgot the strangs!euan wrote:
My Shine Tele back when it had a pearloid guard and the old neck. White+maple is the way to go.
I was going to make it look like this
But decided white + maple looks better and got a MIM Fender neck for £80 or so.
Posted: Fri Jan 18, 2008 10:22 pm
That guitar is sitting right next to me because i got the new neck today. Strung up will all 11s, tuned to D and the bridge wired straight to the jack.
Posted: Fri Jan 18, 2008 11:02 pm
i was thinking about that. but i'll probably end up getting Fender Sealed tuners like i have on my strat. like the ones in this EBAY LINKY i think they're super easy to install, compared to drilling tiny holes into the headstock...i have REALLLY shitty luck with that. but aug installed the first set i got, so i'll be doing this myself.ElCapitan wrote:looks cool. what tuners are you going to get? klusons?
where can i get a decent headstock decal (besides guitarfather)? and what i do with that? put it on and then spray the fuck out of it with clear coat, si?
Posted: Fri Jan 18, 2008 11:09 pm
THats a mighty mite neck. They are okay i guess, I have no experience with them, but have heard decent things about them for the money. As far as decals go, search ebay for telecaster headstock decal, and choose wisely. If you want to sink it into the clear like new ones, DGNR8 can tell you his secrets, basically from what I've read, you have to mist light coats on the decal, let it dry, mist more coats, then spray a couple of heavy coats then wet sand?
Posted: Sat Jan 19, 2008 5:52 am
I got mine from geocha at ReRanch. Not perfect but pretty nice. And Cowbells break down is what I did on mine.More Cowbell wrote: As far as decals go, search ebay for telecaster headstock decal, and choose wisely. If you want to sink it into the clear like new ones, DGNR8 can tell you his secrets, basically from what I've read, you have to mist light coats on the decal, let it dry, mist more coats, then spray a couple of heavy coats then wet sand?
Posted: Sat Jan 19, 2008 5:59 am
yes -9.5� Radius
No -Standard Fender “V� Shape
yes -Dual Action Truss Rod
yes -21 Medium Jumbo Nickel Frets
yes -25.5� Scale
yes -Black Marker Inlays
yes -1 11/16 � Pre-Slotted Nut
yes -2 3/16" Neck Heel
yes -3/8" Tuning Peg Holes
yes -8
no-1
seems like it will work.
No -Standard Fender “V� Shape
yes -Dual Action Truss Rod
yes -21 Medium Jumbo Nickel Frets
yes -25.5� Scale
yes -Black Marker Inlays
yes -1 11/16 � Pre-Slotted Nut
yes -2 3/16" Neck Heel
yes -3/8" Tuning Peg Holes
yes -8
no-1
seems like it will work.
Posted: Sat Jan 19, 2008 7:34 am
thanks duder! out of curiousity why you no likey teh v shape?matt69vdub wrote:yes -9.5� Radius
No -Standard Fender “V� Shape
yes -Dual Action Truss Rod
yes -21 Medium Jumbo Nickel Frets
yes -25.5� Scale
yes -Black Marker Inlays
yes -1 11/16 � Pre-Slotted Nut
yes -2 3/16" Neck Heel
yes -3/8" Tuning Peg Holes
yes -8
no-1
seems like it will work.
Posted: Sat Jan 19, 2008 2:49 pm
YES. Pearl reminds me too much of those overdone JEMs.Mike wrote:That looks nice, would be even niceer with flat white scratcher. Fuck some pearloid.euan wrote:
My Shine Tele back when it had a pearloid guard and the old neck. White+maple is the way to go.
I was going to make it look like this
But decided white + maple looks better and got a MIM Fender neck for £80 or so.
Posted: Sat Jan 19, 2008 3:41 pm
I'm pretty sure Mighty Mite are Fender authorised. Looking good, Jimmy :D
Posted: Sat Jan 19, 2008 4:33 pm
thanks man! i'm looking forward to this....and i'm getting a totally wild ass hair and thinking about MAYBE doing a matching headstock...BobArsecake wrote:I'm pretty sure Mighty Mite are Fender authorised. Looking good, Jimmy
do you guys think that would teh gayz0rz? a white tele, white PG and white matching headstock? too much white?
Posted: Sat Jan 19, 2008 5:32 pm
No way! Put matching headstocks on everything. I lurrve 'em.St. Jimmy wrote:thanks man! i'm looking forward to this....and i'm getting a totally wild ass hair and thinking about MAYBE doing a matching headstock...BobArsecake wrote:I'm pretty sure Mighty Mite are Fender authorised. Looking good, Jimmy
do you guys think that would teh gayz0rz? a white tele, white PG and white matching headstock? too much white?
Posted: Sat Jan 19, 2008 5:48 pm
ha ha. yeah, i totally agree with that. i've just never done anything like that before. so i'm nervous about fucking it up.ludger wrote:No way! Put matching headstocks on everything. I lurrve 'em.St. Jimmy wrote:thanks man! i'm looking forward to this....and i'm getting a totally wild ass hair and thinking about MAYBE doing a matching headstock...BobArsecake wrote:I'm pretty sure Mighty Mite are Fender authorised. Looking good, Jimmy
do you guys think that would teh gayz0rz? a white tele, white PG and white matching headstock? too much white?
Posted: Sat Jan 19, 2008 10:02 pm
I hadn't done anything before either. The guys here are pretty helpful. You'll do it no problem.St. Jimmy wrote:
ha ha. yeah, i totally agree with that. i've just never done anything like that before. so i'm nervous about fucking it up.
Posted: Sat Jan 19, 2008 11:01 pm
i can verify that mighty might necks are worth the price. deffinitly
as for decals when i did the gibson one, i just sprayed 3 coats, sanded, then applied the decal, and did everything normal but i put more emphisis on the edges of the decal and after 3 level sandings it blended in just fine.
as for decals when i did the gibson one, i just sprayed 3 coats, sanded, then applied the decal, and did everything normal but i put more emphisis on the edges of the decal and after 3 level sandings it blended in just fine.
Posted: Sun Jan 20, 2008 2:08 am
when i get close to putting it all together, i'll for sure look to you and the others here for help.robert(original) wrote:i can verify that mighty might necks are worth the price. deffinitly
as for decals when i did the gibson one, i just sprayed 3 coats, sanded, then applied the decal, and did everything normal but i put more emphisis on the edges of the decal and after 3 level sandings it blended in just fine.
Posted: Sat Jan 26, 2008 1:21 am
okay. the neck came today! woo hoo. and i love how it looks and i think i'm going to love how it feels.
now, for the help part. so it fits nice and tight in the pocket when i put in there, but when i drill it down, a gap forms between the base of the neck the guitar...WTF?! i don't want to ruin the neck by continually unscrewing and screwing it...am i fucking retarded (yes, i probably am)? what's the best way to install a neck...god, i've been playing music for 13 years and i don't know how to do this shit...
anyway, here's what it looks like currently:
now, for the help part. so it fits nice and tight in the pocket when i put in there, but when i drill it down, a gap forms between the base of the neck the guitar...WTF?! i don't want to ruin the neck by continually unscrewing and screwing it...am i fucking retarded (yes, i probably am)? what's the best way to install a neck...god, i've been playing music for 13 years and i don't know how to do this shit...
anyway, here's what it looks like currently: