Malikcaster =M= FINAL MOVIE UP NOW

Mo Law-ka · Post by **Mo Law-ka** » Fri Jul 11, 2008 2:56 am

get this shit done ngz, i want to see this bad boy done!

robroe · Post by **robroe** » Mon Jul 14, 2008 10:54 pm

I NEEDS 6 FERRULES.

I NEEDS 3 POTS

i got caps for tone if you want tone. i forgot if you want tone

what do you want the knobs to do?

luke · Post by **luke** » Mon Jul 14, 2008 10:55 pm

robroe wrote:I NEEDS 6 FERRULES.

I NEEDS 3 POTS

i got caps for tone if you want tone. i forgot if you want tone

what do you want the knobs to do?

Neck volume, bridge volume, master tone, yo.

robroe · Post by **robroe** » Tue Jul 15, 2008 11:33 am

ok so someone send me 3 pots and 6 ferrules then. ill whip it out for you

DGNR8 · Post by **DGNR8** » Tue Jul 15, 2008 1:33 pm

I'll send them today ngz.

luke · Post by **luke** » Tue Jul 15, 2008 2:17 pm

FUCK YEAHZ.

robroe · Post by **robroe** » Wed Jul 23, 2008 2:49 am

i got a fat bag of pots yesterday.

the ferrules are too big so im gonna bust out the wood chipper attachment on my dremmul to get it going with them.

tone pot came pre-soldered with coolass looking resister

robroe · Post by **robroe** » Thu Jul 24, 2008 8:07 pm

all wired up ! AND IT WORKS N SHIT

i made a video for it. i figure the thing needs a ground wire going from the tone pot to the bridge, but the bridge is stainless steel and it wont stick.

any ideas ?

Post by **Mike** » Thu Jul 24, 2008 8:14 pm

robroe wrote:all wired up ! AND IT WORKS N SHIT

i made a video for it. i figure the thing needs a ground wire going from the tone pot to the bridge, but the bridge is stainless steel and it wont stick.

any ideas ?

Can you trap the wire between the bridge and the body to make contact?

Otherwise scratch the base of the bridge to shit and just keep on trucking with the soldering until that puppy binds.

robroe · Post by **robroe** » Thu Jul 24, 2008 8:31 pm

yea ill probably just jam the wire up under the plate and screw that shit down

robroe · Post by **robroe** » Thu Jul 24, 2008 10:18 pm

[youtube][/youtube]

serfx · Post by **serfx** » Thu Jul 24, 2008 11:01 pm

that is totally fucking +1 to GNAR!

Justin J · Post by **Justin J** » Fri Jul 25, 2008 2:17 am

does the bridge pickup have a brass grounding plate? if it does, just make sure the black wire from the pickup is soldered to that and you won't need a bridge ground.

robroe · Post by **robroe** » Fri Jul 25, 2008 2:20 am

Justin J · Post by **Justin J** » Fri Jul 25, 2008 2:57 am

where'd that pickup come from? my super cheap gfs tele bridge pickup came with one.

robert(original) · Post by **robert(original)** » Fri Jul 25, 2008 3:54 am

fuck the malikcaster.
wheres the dotscaster?
but really, who's got the neck for the malikcaster?

Post by **Mike** » Fri Jul 25, 2008 7:06 am

OK how much money do you reckon you need? I can chip in. Got paid today.

luke · Post by **luke** » Fri Jul 25, 2008 8:28 am

I've got the neck and all related neck hardware, I've got the knobs. I'll finish the job when it gets over here.

Rob, awesome video, I really appreciate what you've done, I still can't believe it's alive!

Mike, chipping in would be much appreciated eternally. Rob, when you find out how much it's going to be, donations aside just PM me with how much you need and I'll make it happen. Seems only fitting!

Post by **Mike** » Fri Jul 25, 2008 8:29 am

Rob needs to drop the paypal addy.

robroe · Post by **robroe** » Fri Jul 25, 2008 12:36 pm

Malik wrote:I've got the neck and all related neck hardware, I've got the knobs. I'll finish the job when it gets over here.

Rob, awesome video, I really appreciate what you've done, I still can't believe it's alive!

Mike, chipping in would be much appreciated eternally. Rob, when you find out how much it's going to be, donations aside just PM me with how much you need and I'll make it happen. Seems only fitting!

thats not how we do shit around here. i would much rather everyone donate 5 or 10 bucks than you pay an assload of money.

i think the doogcaster was about 100 bucks....i cant remember if i took the neck off when i shipped it. i know i had it on at somepoint because i made that video of me covering a weevil keenivl song with it.

this is just the body so depending on how much shipping rates have gone up in 2 years it should be a little less i hope.

PM's me for email paypal addy. I will announce this in the pup too because we know half the kids in the pub don't even play guitars let alone look at the projects forum