get this shit done ngz, i want to see this bad boy done!
Posted: Mon Jul 14, 2008 10:54 pm
by robroe
I NEEDS 6 FERRULES.
I NEEDS 3 POTS
i got caps for tone if you want tone. i forgot if you want tone
what do you want the knobs to do?
Posted: Mon Jul 14, 2008 10:55 pm
by luke
robroe wrote:I NEEDS 6 FERRULES.
I NEEDS 3 POTS
i got caps for tone if you want tone. i forgot if you want tone
what do you want the knobs to do?
Neck volume, bridge volume, master tone, yo.
Posted: Tue Jul 15, 2008 11:33 am
by robroe
ok so someone send me 3 pots and 6 ferrules then. ill whip it out for you
Posted: Tue Jul 15, 2008 1:33 pm
by DGNR8
I'll send them today ngz.
Posted: Tue Jul 15, 2008 2:17 pm
by luke
FUCK YEAHZ.
Posted: Wed Jul 23, 2008 2:49 am
by robroe
i got a fat bag of pots yesterday.
the ferrules are too big so im gonna bust out the wood chipper attachment on my dremmul to get it going with them.
tone pot came pre-soldered with coolass looking resister
Posted: Thu Jul 24, 2008 8:07 pm
by robroe
all wired up ! AND IT WORKS N SHIT
i made a video for it. i figure the thing needs a ground wire going from the tone pot to the bridge, but the bridge is stainless steel and it wont stick.
any ideas ?
Posted: Thu Jul 24, 2008 8:14 pm
by Mike
robroe wrote:all wired up ! AND IT WORKS N SHIT
i made a video for it. i figure the thing needs a ground wire going from the tone pot to the bridge, but the bridge is stainless steel and it wont stick.
any ideas ?
Can you trap the wire between the bridge and the body to make contact?
Otherwise scratch the base of the bridge to shit and just keep on trucking with the soldering until that puppy binds.
Posted: Thu Jul 24, 2008 8:31 pm
by robroe
yea ill probably just jam the wire up under the plate and screw that shit down
Posted: Thu Jul 24, 2008 10:18 pm
by robroe
[youtube][/youtube]
Posted: Thu Jul 24, 2008 11:01 pm
by serfx
that is totally fucking +1 to GNAR!
Posted: Fri Jul 25, 2008 2:17 am
by Justin J
does the bridge pickup have a brass grounding plate? if it does, just make sure the black wire from the pickup is soldered to that and you won't need a bridge ground.
Posted: Fri Jul 25, 2008 2:20 am
by robroe
no
Posted: Fri Jul 25, 2008 2:57 am
by Justin J
where'd that pickup come from? my super cheap gfs tele bridge pickup came with one.
Posted: Fri Jul 25, 2008 3:54 am
by robert(original)
fuck the malikcaster.
wheres the dotscaster?
but really, who's got the neck for the malikcaster?
Posted: Fri Jul 25, 2008 7:06 am
by Mike
OK how much money do you reckon you need? I can chip in. Got paid today.
Posted: Fri Jul 25, 2008 8:28 am
by luke
I've got the neck and all related neck hardware, I've got the knobs. I'll finish the job when it gets over here.
Rob, awesome video, I really appreciate what you've done, I still can't believe it's alive!
Mike, chipping in would be much appreciated eternally. Rob, when you find out how much it's going to be, donations aside just PM me with how much you need and I'll make it happen. Seems only fitting!
Posted: Fri Jul 25, 2008 8:29 am
by Mike
Rob needs to drop the paypal addy.
Posted: Fri Jul 25, 2008 12:36 pm
by robroe
Malik wrote:I've got the neck and all related neck hardware, I've got the knobs. I'll finish the job when it gets over here.
Rob, awesome video, I really appreciate what you've done, I still can't believe it's alive!
Mike, chipping in would be much appreciated eternally. Rob, when you find out how much it's going to be, donations aside just PM me with how much you need and I'll make it happen. Seems only fitting!
thats not how we do shit around here. i would much rather everyone donate 5 or 10 bucks than you pay an assload of money.
i think the doogcaster was about 100 bucks....i cant remember if i took the neck off when i shipped it. i know i had it on at somepoint because i made that video of me covering a weevil keenivl song with it.
this is just the body so depending on how much shipping rates have gone up in 2 years it should be a little less i hope.
PM's me for email paypal addy. I will announce this in the pup too because we know half the kids in the pub don't even play guitars let alone look at the projects forum