Posted: Thu Jun 17, 2010 11:21 pm
HUGE BALLS!!!!
Page 4 of 6
Posted: Sat Jun 19, 2010 5:01 am
Rod, just out of curiosity, what did you use for primer?
Posted: Sat Jun 26, 2010 6:16 pm
Phil - I use BIN shellac based primer. It makes a good base to seal the under coating, even when they are incompatible with the top coat.
Rob - Good news buddy, it's done.
I just finished sanding and buffing. The pictures don't really show how fucking glossy it is, nor do they show how green it is either. They do however show where I sanded through near the neck pocket. The filling turned out pretty good although it's not perfect and there are a couple of spots where I over sanded during the prep. You can't tell unless you look at just the right angle. Oh, yeah, and then there's the stains where the tint coat dripped.
I'm sure I'm making it out to sound worse than it is, but I'm still happy with the way it turned out.
Rob - Good news buddy, it's done.
I just finished sanding and buffing. The pictures don't really show how fucking glossy it is, nor do they show how green it is either. They do however show where I sanded through near the neck pocket. The filling turned out pretty good although it's not perfect and there are a couple of spots where I over sanded during the prep. You can't tell unless you look at just the right angle. Oh, yeah, and then there's the stains where the tint coat dripped.
I'm sure I'm making it out to sound worse than it is, but I'm still happy with the way it turned out.
► Show Spoiler
Posted: Sat Jun 26, 2010 6:40 pm
YUS !!! THANK YOU SO MUCHHHH!!!!
have you used any of the parts off the busted stang yet ?
have you used any of the parts off the busted stang yet ?
Posted: Sat Jun 26, 2010 6:47 pm
No, not yet. I had a plan to build a new guitar, but it hasn't worked out.robroe wrote:YUS !!! THANK YOU SO MUCHHHH!!!!
have you used any of the parts off the busted stang yet ?
Now all I need to do is get it shipped back to you and I also need to get my passport renewed, so I'm going to try to kill two birds with one stone. There is no way I'm going to the post office near my house, the line is over an hour wait on average so I'll have to go to one near my office. I can't be sure what day I can get down there, but I'll let you know once I mail it.
Do me an favor and PM me your address again.
Posted: Sun Jun 27, 2010 4:09 am
Phil - I use BIN shellac based primer. It makes a good base to seal the under coating, even when they are incompatible with the top coat.
Thanks - that's the same thing I used on my Duo Sonic, and I am really happy with that as a primer, and with how the project turned out - and I'm not very handy with stuff like painting.
That Bronco looks fantastic - I really like the "aged" look of the SFG. Nice work Rod - and congrats Rob!
Thanks - that's the same thing I used on my Duo Sonic, and I am really happy with that as a primer, and with how the project turned out - and I'm not very handy with stuff like painting.
That Bronco looks fantastic - I really like the "aged" look of the SFG. Nice work Rod - and congrats Rob!
Posted: Sun Jun 27, 2010 5:06 am
BIN is great, but you really have to move fast with it. It runs and sags like a motherfucker if you don't keep the can moving. Each coat turns out pretty transparent, but as you build them up and get the paint flowing right it only takes a quick sanding before the top coat goes on.Phil O'Keefe wrote:Phil - I use BIN shellac based primer. It makes a good base to seal the under coating, even when they are incompatible with the top coat.
Thanks - that's the same thing I used on my Duo Sonic, and I am really happy with that as a primer, and with how the project turned out - and I'm not very handy with stuff like painting.
That Bronco looks fantastic - I really like the "aged" look of the SFG. Nice work Rod - and congrats Rob!
What I like about Rob's guitar is that I did the tint coats before the clears. That means the tint directly effected the over all color and will never wear off with time, just get darker with age.
In contrast I've used tint coats over top of the clears to give an aged look, but as the guitar gets played the tinted top coat will wear and show brighter colors in those spots.
Posted: Sun Jun 27, 2010 7:32 pm
That thing looks so Cool, I can't wait to see it all put back together. I love SFG
Posted: Thu Jul 01, 2010 5:02 pm
Dropped it off at UPS today and it should be there on Tuesday!
Check your pm for a tracking number.
Check your pm for a tracking number.
Posted: Mon Jul 05, 2010 8:22 pm
Pics when you get it put back together Rob!!!
Posted: Mon Jul 05, 2010 9:37 pm
pics, videos, songs, everything
here it is before i sent it off.
[youtube][/youtube]
here it is before i sent it off.
[youtube][/youtube]
Posted: Tue Jul 06, 2010 4:54 am
That's great! What were you running the vocal through?Posted: Tue Jul 06, 2010 11:19 pm
Posted: Tue Jul 06, 2010 11:53 pm
nice!
now a mint guard, black pup cover and yer ready to rumble!!!
nice job!
Pat.
now a mint guard, black pup cover and yer ready to rumble!!!
nice job!
Pat.
Posted: Wed Jul 07, 2010 12:30 am
That's damned nice.
I actually really like the SFG/tort/white pickup cover combo much more than I should.
I actually really like the SFG/tort/white pickup cover combo much more than I should.
Posted: Wed Jul 07, 2010 1:07 am
thats cuz its 70 dollar repro tort. not shitty 5 dollar tort they slap on there now
Posted: Wed Jul 07, 2010 1:11 am
FF to about 1:32 !!!Pacafeliz wrote:nice!
now a mint guard, black pup cover and yer ready to rumble!!!
nice job!
Pat.
[youtube][/youtube]
[/img]Posted: Wed Jul 07, 2010 1:14 am
WONDERFUL!!! (the guitar... not the band!)
oh sorry... it's not YOUR band, right?!
Pat.
oh sorry... it's not YOUR band, right?!
Pat.
Posted: Wed Jul 07, 2010 1:21 am
not my band. just the only other sfg bronco besides my own that i have ever seen in my life.
i like the tort way too much to ever change it
i like the tort way too much to ever change it
Posted: Wed Jul 07, 2010 3:09 am
