Page 5 of 5
Posted: Fri Apr 08, 2011 10:59 pm
by Grant
Now with infinite-percent more comp stripe!
Posted: Tue Apr 12, 2011 8:20 am
by Grant
Right so here's the idea.
Three way toggle switch down at the bottom. Three
mini DPDT slide switches up top for series/parallel, phase, and strangle.
No Jaguar plate, no onboard electronics. Not gonna try to do a custom pickguard shape. I'm reining things back a bit.
Bronco knobs. Cream tuners, eventually.
The pickups aren't quite that huge. They're big, but not that big. Close enough.
1ply white or white/black/white for the pickguard. Not 100% sure.
Posted: Tue Apr 12, 2011 4:28 pm
by Mo Law-ka
Grant wrote:
Right so here's the idea.
Three way toggle switch down at the bottom. Three
mini DPDT slide switches up top for series/parallel, phase, and strangle.
No Jaguar plate, no onboard electronics. Not gonna try to do a custom pickguard shape. I'm reining things back a bit.
Bronco knobs. Cream tuners, eventually.
The pickups aren't quite that huge. They're big, but not that big. Close enough.
1ply white or white/black/white for the pickguard. Not 100% sure.
You will WILL hit the mini switches if you put them there, especially with that orientation. I'd suggest push-pull pots instead and a mini-switch down by the controls.
Posted: Tue Apr 12, 2011 7:58 pm
by Grant
Goddamnit Mo stop being sensible.
Posted: Tue Apr 12, 2011 11:20 pm
by SKC Willie
It's all about the way you play. I would NEVER hit them there because I strum guitar right next to the bridge . . .
if you play over the neck; forget about it.
Posted: Wed Apr 13, 2011 12:19 am
by Grant
Hey you know what I'm not doing? Making more mockups. If I make anoth
Posted: Wed Apr 13, 2011 12:32 am
by Grant
Title of this thread is now "Why Grant never gets anything done".
