new truss rod design
Posted: Mon May 28, 2007 11:14 pm
check it, im pressed for time so i can;t expolain much but this what i got
Page 1 of 1
Posted: Mon May 28, 2007 11:20 pm
So basically it's right down one edge? Why?
Posted: Mon May 28, 2007 11:27 pm
Yeah wouldn't it be less effective at keeping the neck straight?Malik wrote:So basically it's right down one edge? Why?
Posted: Mon May 28, 2007 11:55 pm
no no no no,
there is like 2 1/2 inchs on one side and almost 3 1/2 inchs on the other side,
that truss rod slot is essentially the center line for the neck.
its a new design becuz it doesn;t need a nasty cover to cover up the slot nor does it need any shims or a skunk stripe to cover it up.
its all right there.
think of it this way, the truss rod slot is 4 mms wide,
apply that to the rest of the picture, then you will see that there is mondo clearence on either side.
there is like 2 1/2 inchs on one side and almost 3 1/2 inchs on the other side,
that truss rod slot is essentially the center line for the neck.
its a new design becuz it doesn;t need a nasty cover to cover up the slot nor does it need any shims or a skunk stripe to cover it up.
its all right there.
think of it this way, the truss rod slot is 4 mms wide,
apply that to the rest of the picture, then you will see that there is mondo clearence on either side.
Posted: Tue May 29, 2007 12:03 am
I don't get it. Your picture has like a drawing of a neck on it, and the truss goes right down the edge. What's that all about?
And don't rosewood fretboard guitars not do it like that anyway?
And don't rosewood fretboard guitars not do it like that anyway?
Posted: Tue May 29, 2007 1:03 am
wait, i thought that's how truss rods are normally done.
i'm a little confused.
i'm a little confused.
Posted: Thu May 31, 2007 5:08 am
not neccessarily.
you can find strat neck that have a rosewood board and a skunk stripe.
doesn't make much sense cuz usually youlay it under the board or if you have maple you lay it in the back via skunk stripe.
this is also unique becuz its a gibson truss rod style layed out like a vintage fender.
that neck line couls be really old. almost all of my blank look kinda like that.
IM OFF TO CHICAGO TO SEE DINO JR
you can find strat neck that have a rosewood board and a skunk stripe.
doesn't make much sense cuz usually youlay it under the board or if you have maple you lay it in the back via skunk stripe.
this is also unique becuz its a gibson truss rod style layed out like a vintage fender.
that neck line couls be really old. almost all of my blank look kinda like that.
IM OFF TO CHICAGO TO SEE DINO JR
Posted: Thu May 31, 2007 5:36 pm
BASTARD!!! They're playing 1 non-festival date here, and it's over-18s only. Fuck that shit.
Posted: Thu May 31, 2007 9:26 pm
Then go to a festival date, i.e. Reading Saturday. Like me. 