Toaster PUP options...
Posted: Sat Feb 16, 2008 7:02 pm
My Fauxkinbacker has 3 reasonably good-looking toaster PUPs. They sound great, but not all that much like the real thing since they use an alnico bar instead of polepieces.
Here are the options:
Track down 2 real toasters (no middle) at around $100 each if they can even be found (damn Ric)
OR - It looks like a bare Tele neck PUP would fit under the covers if I cut the sides of the bobbin off. Plus, a tele PUP has the same polepieces, wire gauge, and resistance as a 50s toaster. 3 $23 specials from GFS could do the whole guitar.
I've done this once before - wedging a tele bridge PUP into a chrome HB case with great results.
Opinions? Or should I just leave well enough alone?
Here are the options:
Track down 2 real toasters (no middle) at around $100 each if they can even be found (damn Ric)
OR - It looks like a bare Tele neck PUP would fit under the covers if I cut the sides of the bobbin off. Plus, a tele PUP has the same polepieces, wire gauge, and resistance as a 50s toaster. 3 $23 specials from GFS could do the whole guitar.
I've done this once before - wedging a tele bridge PUP into a chrome HB case with great results.
Opinions? Or should I just leave well enough alone?