Page 1 of 1
Post finished projects w/RobOG bodies
Posted: Sat Mar 01, 2008 3:12 am
by bassintom
I'll show mine if you show yours...
RobOg did soberb job on the body..no contours at all..
The gold control plate and truss rod cover are from a sheet of brass I picked up at Ace hardware.Cut them up and polished them.There's also a brass control plate on the back.And it now has flat gold pup ring on top of the black ring.
Posted: Sat Mar 01, 2008 6:25 am
by Sublimedo
AGAIN!!
Posted: Sat Mar 01, 2008 9:25 am
by mickie08
here are my 2
bronco mahogany body with dou/toronado bridge and p90. Warmoth neck
Tele double bound mahogany with 2 GFS retrotron pups and bigsby.
Rob did both bodies and both pup guards.
Posted: Sat Mar 01, 2008 9:56 am
by gaybear
that tele is hot.
Posted: Sat Mar 01, 2008 1:41 pm
by tribi9
gaybear wrote:that tele is hot.
+1 but it needs a single coil on the neck.
Posted: Sat Mar 01, 2008 3:43 pm
by ludger
Great stuff guys! Some day I'll be able to post in this thread.
Posted: Sat Mar 01, 2008 3:51 pm
by bassintom
RobOg is inspiration to get things done.I think these look better than a lot of the shite you can pick off the shelves.
RobOg
Posted: Sat Mar 01, 2008 5:00 pm
by euan
Still waiting for the weather not to be wet/freezing cold to do anything.
Posted: Sat Mar 01, 2008 8:30 pm
by iCEByTes
broked links ...
upload the imageshack please
Posted: Sat Mar 01, 2008 8:34 pm
by euan
Images are fine for me.
Posted: Sat Mar 01, 2008 9:05 pm
by astro
Got a Jazzy body from RobOG in December. I live in an apartment, and I'll be painting on my balcony. Which means I have to wait until the weather warms up and the snow melts...
sadly the waether doesn't look like it will get nicer any time soon...
Posted: Sat Mar 01, 2008 9:30 pm
by matte30is
I just started on my chambered jazz body that robert sold me back in nov. I took it to work thursday and drilled 3 big holes in it to shake out a bunch of broken off wood filler that had came loose and was rattling around int here. I covered the holes with 934 aircraft sealant and let it cure over the weekend. I will sand it down and bondo it and paint it this next week.
Posted: Sat Mar 01, 2008 9:48 pm
by bassintom
I would imagine as soon as this weather breaks there's going to be a lot of bodies getting painted..I have the red hollow that needs a clear coating to seal the pinup.And some necks and bodies..etc..And bass fishing heats up in April.
I painted the diddley in between snow storms out in my mudroom with the windows open..Desperation will do that to a man sometimes.
Posted: Sat Mar 01, 2008 9:56 pm
by iCEByTes
euan wrote:Images are fine for me.
maybe my host
i will try at my job day 3
*Edit , fixed after reboot my adsl ... maybe corrupted package ...
Posted: Sun Mar 02, 2008 9:24 pm
by robert(original)
bassingtom looks like a ruffntumble mother fucker, i better get those pup rings out to ya asap!
on the bright side, i did get the damn thing setup perfectly like sunday night, but then all the bullshit started up. i just gotta spend 30 making the templates and then another 30-45 mins making the damn, things, sorry its been taking so long.......
Posted: Sun Mar 02, 2008 10:44 pm
by bassintom
Take your time Robert,there's no rush.Thanks.
Posted: Mon Mar 03, 2008 5:53 am
by Richard
mickie08 wrote:
Tele double bound mahogany with 2 GFS retrotron pups and bigsby.
Every time I see this picture it makes me want to build something similar. That guitar is beautiful.
Posted: Mon Mar 03, 2008 6:15 am
by mickie08
thanks. It still has a few issues but I am gonna take it in this week hopefully to get everything re-wired and a good setup done on it.
Posted: Mon Mar 03, 2008 6:40 am
by Richard
Are you going to leave the neck the way it is? I think it would look really nice if it was refinished in the vintage tinted laquer, but those Mexican necks just feel so good that I don't know if I would mess with it.
Posted: Mon Mar 03, 2008 8:07 am
by mickie08
It would look good tinted, but I probably won;t mess with it. We will see. Maybe later