'65 Jaguar problem.
Moderated By: mods
'65 Jaguar problem.
So I have a '65 Jag that is having a problem with keeping the low E string in tune.
There is a crack in the headstock that seems to be solid and hasn't gotten worse in the years I have owned the guitar.
Robert (OG) assured me that if the crack doesn't open up if you push it that it shouldnt be worried about until it breaks.
The crack goes around the g, b and e strings. Not any where near the low E sting.
All the other strings stay in tune very well. But as soon as I touch the low E its goes out. If I bend the string, even slightly, its fucked. Normally the low E is the easiest string to keep in tune.
I have the tremolo screwed all the way so its blocked, as I dont use it.
I have a vintage mustang bridge on it with tape around the posts.
I have cut the nut so that the strings fit and move through easily.
I put pencil shavings in the groves of the nut.
I have the neck shimmed.
Has Grover mini-Rotomatic's tuners. (check link)
What else could there be? Time to change to to lighter gauge strings? I use 10's with a .52 low E at the moment.
Time to change the nut??
Any help would be greatly appreciated. Cheers!
http://www.stewmac.com/shop/Tuners/Guit ... ml#details
There is a crack in the headstock that seems to be solid and hasn't gotten worse in the years I have owned the guitar.
Robert (OG) assured me that if the crack doesn't open up if you push it that it shouldnt be worried about until it breaks.
The crack goes around the g, b and e strings. Not any where near the low E sting.
All the other strings stay in tune very well. But as soon as I touch the low E its goes out. If I bend the string, even slightly, its fucked. Normally the low E is the easiest string to keep in tune.
I have the tremolo screwed all the way so its blocked, as I dont use it.
I have a vintage mustang bridge on it with tape around the posts.
I have cut the nut so that the strings fit and move through easily.
I put pencil shavings in the groves of the nut.
I have the neck shimmed.
Has Grover mini-Rotomatic's tuners. (check link)
What else could there be? Time to change to to lighter gauge strings? I use 10's with a .52 low E at the moment.
Time to change the nut??
Any help would be greatly appreciated. Cheers!
http://www.stewmac.com/shop/Tuners/Guit ... ml#details
Thanks for the reply Duo!DuoSonicBoy wrote:Sounds like yr doing everything right. Is this a consistent problem, or could it just be a bad string? I would suspect strings first, then maybe the tuner. Sometimes the washer that keeps tension on the key part degrades or gets flattened and allows the gear to slip.
This has been going on now for a few months. I have battled with this so much that I had to switch the low e tuner for the high e one as it felt like the tuner was getting a little, dry from being tightened and loosened again and again. They are otherwise new tuners.
I also tried a tune-o-matic bridge for a while but hated the radius and it didnt feel very solid.
This is gonna sound strange, but both my '66 mustang and '65 jaguar have uneven neck pockets or necks.
The treble side sits higher on both of them. What I do is, I shim the neck on the bass side and then add a normal shim. I have pictures of the neck joints that I'll try and post later.
I'm starting to think I should try .10's without a thick low e? I have been wanting to this for a while now as the .52 E is too loud against the other strings and even more so with hotrail type pups.
I thought about trying out a new .42 for a E string (like you find on .9's) that I have sitting around. Though not to play with the .10's! Just to see if it holds the tuning. Gonna do that tonite!
So after leaving a .42 low E string on for about an hour, I think it solved the problem!
I'm gonna just switch to normal .10's and see how that goes. One thing I did notice was that the rest of the strings became a little more flabby with a lighter low E on there. I hope theres not a problem with the truss rod now!
DuoSonicBoy-Cheers for the advice. I was looking at the guitar the whole time and not the strings. Thanks.
I'm gonna just switch to normal .10's and see how that goes. One thing I did notice was that the rest of the strings became a little more flabby with a lighter low E on there. I hope theres not a problem with the truss rod now!
DuoSonicBoy-Cheers for the advice. I was looking at the guitar the whole time and not the strings. Thanks.
take the tape of the posts for fucks sake.
http://fashiontipsband.bandcamp.com/album/fucking-hell
Dance music for anxious people
Dance music for anxious people
No, I miss nothing.65fenvox wrote:I guess you missed the part with "I screwed in the tremolo as I dont use it".Hurb wrote:take the tape of the posts for fucks sake.
http://fashiontipsband.bandcamp.com/album/fucking-hell
Dance music for anxious people
Dance music for anxious people