ShortScale.org

Posted: **Mon Jun 23, 2008 8:15 am**

I was trying to remove the nut by slightly heating it up with my soldering iron, but the fucking thing wouldn't pop out so I ended up burning and cracking the fucking thing. If I can get the nut ill be good cuz the cutout is still intact, heat wont work any ideas??

Posted: **Mon Jun 23, 2008 10:04 am**

I know that's a musoland, but GOOD LORD!

Since it's glued in, I would try some kinda of anti-glue substance, like nailpolish remover...

Posted: **Mon Jun 23, 2008 1:43 pm**

take a small flathead screwdriver and wedge it in between the nut and the fretboard. slowly but firmly tap the screwdriver to remove.

Posted: **Mon Jun 23, 2008 2:47 pm**

What were you thinking?

Posted: **Mon Jun 23, 2008 2:51 pm**

Be honest, frustration took over and you fucked it up.

Posted: **Mon Jun 23, 2008 3:53 pm**

If it was a brass nut that might have worked. But seriously?

Best method for any nut is stanley knife around the edges to seperate the nut from the paint/clear then small flathead screwdriver tapped against the edge of the nut like Mo Rocca says.

Posted: **Mon Jun 23, 2008 4:03 pm**

Thx all,

Will give that a go! I did get frustrated and it got messier than It should have!

Posted: **Mon Jun 23, 2008 4:17 pm**

The right way to put a nut in is with one very small drop of super glue. The guy that installed your coulda just glued the whole thing in solid.

Now you probably need a refret and a level that fingerboard. Sorry for the bad new man.

Posted: **Mon Jun 23, 2008 4:25 pm**

Ill probably just save the tuners, and sell it for like $5 bux on feebay.

Posted: **Mon Jun 23, 2008 4:27 pm**

tribi9 wrote:Ill probably just save the tuners, and sell it for like $5 bux on feebay.

What kinda neck is it????

Posted: **Mon Jun 23, 2008 4:55 pm**

How does the neck feel (playing wise)? I might be interested.

Posted: **Mon Jun 23, 2008 5:19 pm**

TheBurbz wrote:How does the neck feel (playing wise)? I might be interested.

Sorry, sold for $5 bux a few minutes ago.

Posted: **Mon Jun 23, 2008 5:29 pm**

tribi9 wrote:
TheBurbz wrote:How does the neck feel (playing wise)? I might be interested.
Sorry, sold for $5 bux a few minutes ago.

2 me. Thanks man!

Posted: **Mon Jun 23, 2008 5:34 pm**

5 bux?!? you fool!

Posted: **Mon Jun 23, 2008 5:37 pm**

TheBurbz wrote:5 bux?!? you fool!

I'm sure he'll cut me a deal, when I buy a body off him plus I dont think I would have been able to fix it.

Posted: **Mon Jun 23, 2008 5:45 pm**

Yeah but a new neck will cost at least $75

Posted: **Mon Jun 23, 2008 5:49 pm**

Nice going, champ!

Posted: **Mon Jun 23, 2008 6:43 pm**

wow.
wow.
wow.
it would have been better to beat thething to death with a hamer, the worst that would have happened is a crack in the finish.
thats insane.
wow.

Posted: **Mon Jun 23, 2008 7:28 pm**

Eurgh. This went bad.

Posted: **Mon Jun 23, 2008 8:41 pm**

Hes getting the neck only, no tuners. And believe me its looking a little rough. He might actually not be able to save it.

Hey Im sure lots of people have given stuff close to free here, isn't that what the whole "bro deal" thing is about? What goes around comes around.

ShortScale.org

I burned one of my nutz.

I burned one of my nutz.