Page 1 of 1
Heres a challenge
Posted: Fri Aug 15, 2008 4:01 am
by louis
who can build a decent reverb pedal.
BUT
the input and output jacks have to be XLR or whatever that 3 pinned mic shit is, as in, its going straight from the mic, through the pedal, to the board.
and how much will it cost?
Posted: Fri Aug 15, 2008 4:08 am
by Will
I don't think anyone here has the skill to build a digital reverb. The circuits are relatively simple, but there is absolutely no margin for error as the chips are very sensitive (and about $20-25 each).
Analog would be very large - imagine a standard reverb tank connected to Phase 100 enclosure. It would also be very fragile and a little noisy.
Yr best bet would be a used Alesis box or something - anything DIY'd would probably run $200+ for digital and $150+ for analog.
Posted: Fri Aug 15, 2008 7:24 am
by timhulio
You can get XLR-1/4" converters. Then you can use a nomal RV-3 or whatever your fav reverb pedal is.
Posted: Fri Aug 15, 2008 12:56 pm
by Sloan
yeah ng. get a danelectro spring keeeng and load that shit up with some XLR shit's.