My 1971 Telecaster project
Posted: Sat Nov 08, 2008 10:34 pm
Bought this on eBay. Alder body stripped and refinished natural with one replaced saddle, knobs, pickguard, switch tip and tone cap.
So I refinished it using my "Home Depot Daphne Blue" method using the following:
Flat White


Harbor Blue


Nitrocellulose Clear


After spraying white and the color, here's what it looked like:

Next I wet sanded using 2000 grit, then 0000 steel wool and Kiwi brown shoe polish, followed by more steel wool after which I sanded and dinged some corners. Add a Dakaware "Top Hat" switch tip, re-issue flat knobs, Guitar Fetish Mint Green pickguard that received the steel wool/Kiwi treatment and that I notched for the truss rod nut. The Clay Smith Cams sticker was my final touch.






So I refinished it using my "Home Depot Daphne Blue" method using the following:
Flat White


Harbor Blue


Nitrocellulose Clear


After spraying white and the color, here's what it looked like:

Next I wet sanded using 2000 grit, then 0000 steel wool and Kiwi brown shoe polish, followed by more steel wool after which I sanded and dinged some corners. Add a Dakaware "Top Hat" switch tip, re-issue flat knobs, Guitar Fetish Mint Green pickguard that received the steel wool/Kiwi treatment and that I notched for the truss rod nut. The Clay Smith Cams sticker was my final touch.




