Page 1 of 1
CIJ Jag HH dragster p/u wiring
Posted: Tue May 26, 2009 1:13 pm
by 65erSC
I want to put the stock dragster p/u's back in a Jag HH I bought used. The guy that took them out did not lable them. They look identical except one has a black wire and one has a grey wire. Which one is the bridge? Thanks for any help.
Posted: Tue May 26, 2009 2:12 pm
by Bacchus
I think you're going to need a voltmeter. Measure the resistance of each pickup, and the hotter one will likely be the bridge.
Someone else on here should be able to give you more advice about how to use a voltmeter and what exactly you are looking for.
Posted: Tue May 26, 2009 2:31 pm
by Gavin
Well for a start you'd need a multimeter to measure resistance. A volt meter measures Voltage.
Posted: Tue May 26, 2009 2:34 pm
by Bacchus
Gavin wrote:Well for a start you'd need a multimeter to measure resistance. A volt meter measures Voltage.
Multimeter. That's it. I knew that voltmeter wasn't right, but I googled it and they exist.
Get a multimeter.
Posted: Tue May 26, 2009 5:45 pm
by 65erSC
Got it, thanks for the help. Will check it when I get home.
Posted: Tue May 26, 2009 9:44 pm
by Shaguar
What did he replace the pickups with?
Posted: Tue May 26, 2009 10:21 pm
by Fran
I dont think it will matter if you did get them mixed up
Posted: Wed May 27, 2009 8:46 am
by Mike
Fran wrote:I dont think it will matter if you did get them mixed up :lol:
If it's anything like the '69 CIJ Mustang pickups both models are identical. Good ol' Fender.