Page 1 of 1
Before I bring My Mustang to my Tech should I.......
Posted: Fri Jan 01, 2010 3:23 pm
by Martin101
I have a 69 ri mustang which the wiring has been changed. I bought it that way.
If I bring it to my tech should I assume he would know how to rewire it back to the original wiring, or should I bring something a wiring diagram. If so where can I find one to print online?
thanks
Posted: Fri Jan 01, 2010 3:31 pm
by laterallateral
you should call him and ask.
Posted: Fri Jan 01, 2010 3:33 pm
by robroe
seymourduncan.com has wiring diagrams for everything
doesnt hurt
Posted: Fri Jan 01, 2010 5:01 pm
by toez10
Hey, unless your tech is familiar with mustangs, you might want to see if he has the schematic.
Posted: Fri Jan 01, 2010 5:53 pm
by stewart
there's a wiring diagram and a complete walkthrough on the shortscale wiki.
Posted: Fri Jan 01, 2010 7:30 pm
by cobascis
stewart wrote:there's a wiring diagram and a complete walkthrough on the shortscale wiki.
http://www.shortscale.org/wiki/index.ph ... er_Mustang
Posted: Fri Jan 01, 2010 8:46 pm
by Martin101
thanks guys!
Posted: Sun Jan 03, 2010 1:50 pm
by Earth
Here's my vintage correct diagram:
LINKY
It doesn't have a ground wire on it because its vintage correct and I really only draw it for vintage guitars and vintage mustang owners don't have to bother with grounding as it happens automatically on the control plate/wire over the body to the bridge thimble. Just make sure all grounds are connected and they lead back to the vibrato or bridge to ground the strings.
White and yellow are hot, blue and black are ground.
