ShortScale.org

So I bought what I thought was a Marshall modded DS-1 for 50 buck's but I'm not quite sure it's
modded I think it's stock and I got shafted, is their any way I can check to see if has been modded?

What did they say the mod entailed ?

If it's a new resistor or something then open it up and have a look. You may see fresh, slightly less neat solder joints.

This may be a bit obvious but the modded DS1 I used to have had an additional 3 way switch added for different distortion modes plus an clipping LED placed where the O of Tone below the tone pot is situated. Also an on/off LED that isn't red would tell you it's probably been modded.

You said Marshall modded. I've never heard of Marshall modding other people's pedals, or is it a different Marshall other than the amp company?

Its a mod to make it more "marshally"
Have a look inside it. It should show signs of someone forking around in there My SD-1 has been owned by hotrod and i think cowbell and theres flying leads on caps and stacked op amps and huge leds for clipping and a huge led on the front. All sorts of good stuff.

Does anybody have any pics in a before and after like presentation? I'm more of a visual aid kinda dude.

For answers from people who are willing to do the googling for you, I'd go sign up at Bossarea.com/forum/


But since I bothered, try these places:


Here is a stock DS-1 PCB: http://www.monteallums.com/images/DS1_PCB.jpg


http://www.lonephantom.com/2010/03/modd ... -1-part-1/


http://blog.makezine.com/bossds-1mod_cc.jpg

http://www.instructables.com/image/F1M1 ... ts-pt1.jpg

http://www.instructables.com/id/Modify-Your-Boss-DS-1/

http://www.instructables.com/id/How-to- ... eing-eye-/

http://www.premierguitar.com/Magazine/I ... _Mods.aspx


http://www.shortscale.org/forum/mods/bb ... s/bold.gif


Also: http://www.howtousegoogle.com/


Additionally, since you can't be bothered to use google for yourself, I'll just paste the relevant content below from Wampler's article:

Classic JCM-type Marshall Tones:
LOCATION CHANGE TO:
C3 .033µF
R17 15k
C2 1µF
D4 1N4148 Connected in Series to another 1N4148
D5 1N4001 Connected in Series to another 1N4001
C5, C9 1µF
R13 OPTIONAL - Change to 1k for tons of gain, if you do this, also change c8 to 1µF


I'd check for some of those.

First thank you I appreciate the info secondly I thought I'd check here first there's no need for the hostility.

Cody_Pole wrote:First thank you I appreciate the info secondly I thought I'd check here first there's no need for the hostility.

No hostility, just trying to teach you to fish.

I understand I'm a little sensitive.

It is modded by the way.