jag roller pots
Posted: Sat May 07, 2011 11:36 am
ok, i have a classic player jag HH. i have already rewired it from...
linky - http://img412.imageshack.us/img412/...gdiagramnl5.jpg
to this...
linky - http://img408.imageshack.us/i/jagphaseschematic.png/
(killswitch has been turned into a phase switch)
...and im happy! however, is there any way of rewiring the coil tap roller for the bridge pup into a bridge pup volume roller with the existing functionality of the phase switch? if so how would i wire it? is it a matter of taking the red/green wire off the middle lug on the roller and putting it on the left lug (as i've seen in original jag schematics)
linky - http://img412.imageshack.us/img412/...gdiagramnl5.jpg
to this...
linky - http://img408.imageshack.us/i/jagphaseschematic.png/
(killswitch has been turned into a phase switch)
...and im happy! however, is there any way of rewiring the coil tap roller for the bridge pup into a bridge pup volume roller with the existing functionality of the phase switch? if so how would i wire it? is it a matter of taking the red/green wire off the middle lug on the roller and putting it on the left lug (as i've seen in original jag schematics)
)
