Page 1 of 1
Really boring question...
Posted: Fri Oct 07, 2011 9:08 pm
by dezb1
What diameter of screw do I need to attach a fender humbucker to its pickup ring as the one in my black top Tele is gubbed.
and the spare GFS ones I have are too thin.
Posted: Tue Oct 11, 2011 2:33 pm
by dezb1
right bought two replacement bolts as i wasn't sure which size i needed one 2.5mm and one 3mm ones too small and one is too large... what's the score. do i need an imperial mesurement?
Posted: Tue Oct 11, 2011 3:29 pm
by UlricvonCatalyst
If it's a US or Mexican part the screw will be an imperial size and staff in hardware stores will all look at you as if you're insane if you ask them for one.
Posted: Tue Oct 11, 2011 4:06 pm
by Pens
Take the pickup to the store with you and try different screws until you find one that fits.
I had a problem finding grub screws for my Supersonic as the guitar shops only stocked US screws and those are Japanese saddles. I finally got a working screw from some block saddles that HR gave me.
Just take the part in and start trying until you find one.
Posted: Tue Oct 11, 2011 4:17 pm
by SKC Willie
Pens wrote:Take the pickup to the store with you and try different screws until you find one that fits.
I had a problem finding grub screws for my Supersonic as the guitar shops only stocked US screws and those are Japanese saddles. I finally got a working screw from some block saddles that HR gave me.
Just take the part in and start trying until you find one.
do this. I always use hardware store screws and I just take the piece in and find one that works. It's never failed me before.
Posted: Tue Oct 11, 2011 4:49 pm
by Fran
Pens wrote:Take the pickup to the store with you and try different screws until you find one that fits.
Posted: Tue Oct 11, 2011 6:23 pm
by dezb1
I'd need to take to whole guitar as my soldering iron is gubbed...
Posted: Tue Oct 11, 2011 7:17 pm
by Pens
Then take the whole guitar.
Posted: Wed Oct 12, 2011 8:18 pm
by NickS
Did someone say
Imperial measurements?
Posted: Wed Oct 12, 2011 8:26 pm
by dezb1
Emailed fender and they say 2.5mm, and to try the screw from the other side of the pickup (don't ask me why I didn't think to try it...) turns out the hole in the pickup lug has been wrecked by the misaligned screw during manufacture and they’re going to replace the pickup under the warranty.
Posted: Wed Oct 12, 2011 8:42 pm
by NickS
That's interesting, and hopefully a happy ending.
I was just Googling for more information and turned up:
Fender wrote:Humbucker Pickup Mounting Screws, Machine #3-48 x 13/16 Philips (12)
Model : 0050166049
Fastfix Direct wrote:The USA has its own system, usually called the Unified Thread Standard. A version of this standard, called SAE for the Society of Automotive Engineers, was used in the American automobile industry. The SAE is still associated with inch based fasteners by the public even though the U.S. auto industry (and other heavy industries relying on SAE) switched to ISO preferred series fasteners back in the 1970s and afterwards.
Screws are described as 4-40, 6-32, 8-32, 10-32, 10-24, etc. (for numeric sizes, odd numbers are rare), or 1/4"-20, 1/4"-28, etc. (for inch unit sizes), with the first number giving shaft diameter (numeric or inches) and the second number being threads per inch.
Wikipedia wrote:#3 = 0.0990 in (2.5146 mm)