ShortScale.org

EDIT: Read through all the way. Basically I was sent incorrect parts, conflicting and incorrect instructions, and OLC won't let me send it to them to be troubleshooted. He instead told me to contact a third party to pay to fix it... Bad service.

I picked up the OLC Shredmeister a few weeks ago. (Took them two weeks to ship it.)

OLC SHREDMEISTER

The sound samples seemed promising and I like that the knobs are all in a row so I can put lables under them.

Here is my design for the waterslide decal I am doing to go on it. (Everything white will be clear decal.)


Shredmaster by Hentai No Baka, on Flickr

Here is what it came like. All the parts were in bags inside the enclosure.


DSC04362 by Hentai No Baka, on Flickr


DSC04363 by Hentai No Baka, on Flickr


DSC04365 by Hentai No Baka, on Flickr


DSC04366 by Hentai No Baka, on Flickr

It had everything!... but instructions. I emailed them to get that sent out. In the mean time I got to painting it metallic orange.


DSC04367 by Hentai No Baka, on Flickr

Then I got to work on making sure my decal will match up with the holes on the pedal.


DSC04369 by Hentai No Baka, on Flickr


DSC04370 by Hentai No Baka, on Flickr


DSC04371 by Hentai No Baka, on Flickr


DSC04372 by Hentai No Baka, on Flickr


DSC04373 by Hentai No Baka, on Flickr

I should be able to get the decal printed tomorrow or Tuesday depending on when I get out of the house. I will also spray the edge of the pedal tomorrow to make sure the orange is covering all the metal that shows. Then it will be time to clear coat.

Haven't looked at the link, but most places have the build instructions online these days.

Yeah I am guessing he will send a link or file. Nothing sent yet. Couldn't find anything via google.

Bottom edges are sprayed and drying. Just need to do the clear coat and it will be ready for decals.


DSC04377 by Hentai No Baka, on Flickr


DSC04378 by Hentai No Baka, on Flickr

Haha, like the C64 graphics. Looking forward to seeing this finished.

It will actually be like the first image. The quick black and white prints I did just to make sure the holes would not hit the graphics.

Got my decals printed out. Should be fun to apply. Have to do clear coat first though.


DSC04379 by Hentai No Baka, on Flickr


DSC04380 by Hentai No Baka, on Flickr


DSC04381 by Hentai No Baka, on Flickr

I know the OLC guy on another forum - will give him a prod and tell him to check his mails. I had PDF instructions for my CHunky Cheese, and that was in the olden days.

Cool! Thanks. Haven't heard from him yet, but painting the case is entertaining me for now. LOL

Holes in my LQ print seem to match up well. Hopefully the nice decals will be as good.


DSC04383 by Hentai No Baka, on Flickr

Prespraying is done.


DSC04384 by Hentai No Baka, on Flickr

In from being clear sprayed. Just need it to dry.


DSC04386 by Hentai No Baka, on Flickr


DSC04387 by Hentai No Baka, on Flickr

Decals are cut ready to apply. Just need the clear to set up. Then it will be apply, dry, and back to more clear coats.


DSC04388 by Hentai No Baka, on Flickr

Got the decal on... and it folded up and looked like sh*t.


DSC04391 by Hentai No Baka, on Flickr

Always have a backup.


DSC04394 by Hentai No Baka, on Flickr

Shredder with a Telemaster! Awesome!

Shred-Master right?

HNB wrote:Shred-Master right?

doh! I get it!

Too cool.

super-sick-awesomes!

I got to work on the board. Thanks Benecol for messaging Mark for me. It did the trick. Here is the board all soldered up. Have to wait on the box clear and cure to do the rest, but it looks cool! Hopefully I didn't f*ck anything up.


DSC04404 by Hentai No Baka, on Flickr


DSC04405 by Hentai No Baka, on Flickr