Page 1 of 1
Quick fix for wah.
Posted: Sun Aug 12, 2012 8:58 pm
by Progrockabuse
My vox wah's switch has died and I need it for Recording a hendrixy thing for a mates project tomorrow. How would I wire it so it was always on so I can stick it in my bypass looper as a temp fix?
Posted: Mon Aug 13, 2012 7:31 am
by NickS
Which model of Vox wah? Post pics of switch, or at least tell us how many lugs. Sorry, was at the jam last night.
Posted: Mon Aug 13, 2012 3:22 pm
by Progrockabuse
no worries, it's a standard v847. the switch has 3 lugs on it.
no biggie if not, contemplating checking cash generator and seeing if they've got a cheap one or a crybaby around.
Posted: Mon Aug 13, 2012 4:06 pm
by NickS
Progrockabuse wrote:no worries, it's a standard v847. the switch has 3 lugs on it.
no biggie if not, contemplating checking cash generator and seeing if they've got a cheap one or a crybaby around.
3 lugs: IIRC, one has two wires, one going to the input and the other to the PCB; the centre lug goes to the output; the other lug goes to the board. Take the wire from the centre lug and connect it to the lug that only has a wire to the PCB.
Posted: Wed Aug 22, 2012 1:43 pm
by Progrockabuse
sorry for late reply, thanks for that nick. worked a treat, installed a replacement switch now. your a legend.
Posted: Thu Aug 23, 2012 7:38 am
by NickS
