Page 1 of 1
Pignose Crossmix 150r?
Posted: Thu May 16, 2013 2:22 am
by speedfish
Anyone familiar with the Pignose Crossmix 150r with two 10" speakers? I have one with a 12" speaker and another amp/chassis that has been removed from it's original cabinet that someone turned into an amp head. I want to build a new cabinet for it and supply it with two 10" speakers, but I can't remember if the 10" speakers were parallel or set diagonally in the cabinet. I am not certain that the Crossmix with one 12" speaker shared the same chassis as the one with two 10" speakers. Can anyone help?
Thanks!
Posted: Tue May 21, 2013 12:53 pm
by NickS
http://i.ebayimg.com/t/1980-PIGNOSE-150 ... wMFgxMjQ0/$(KGrHqZHJEsFCc,QdyFNBQtZgN!cCg~~60_57.JPG
Doesn't look like the amp section is any different. I would say the 10s are on a diagonal as the case doesn't look any wider.
Posted: Tue May 21, 2013 1:57 pm
by speedfish
NickS,
I am thinking the same thing. Does one cabinet appear taller than the other to your eyes?
Thanks again,
Posted: Tue May 21, 2013 2:51 pm
by NickS
Hmm. I suspect so. It may be worth an email to Pignose tech support - Howard Chatt, HChatt at aol.com, to see if he has any old specs.
Posted: Tue May 21, 2013 8:25 pm
by speedfish
NickS wrote:Hmm. I suspect so. It may be worth an email to Pignose tech support - Howard Chatt, HChatt at aol.com, to see if he has any old specs.
NickS,
I chatted with Howard and unfortunately when they purchased Pignose and the designs for the amps the design for the Crossmix amplifiers was not included with the sale. The Crossmix was designed by Paul Rivera and I am assuming that he retains the rights to it's design.
Thanks again,