Page 1 of 3
Assjazzter
Posted: Wed Mar 12, 2014 6:57 pm
by brainfur
haahahaa fuck yeah this thing arrive last nite!
shit looks hot i cant wait to wire it all up and blast out some jazz
Jazzblasster
Posted: Tue Mar 18, 2014 1:18 am
by brainfur
Why did I quote that. Sorry
Posted: Tue Mar 18, 2014 1:32 am
by brainfur
So I definitely need a custom pickguard but it sounds frickin sweet
I already made a paper template for this -- who can cut a guard on the cheap?
I think cooter's closed for business right now..
Posted: Tue Mar 18, 2014 1:54 am
by finboy
I miss that body, it has been passed around a lot!
Posted: Tue Mar 18, 2014 2:11 am
by brainfur
If I can get a pickguard that works it will probably stay with me forever its perfect for jazzb lasting
Posted: Tue Mar 18, 2014 2:22 am
by cur
If you are not in a rush I can cut one for you.
Posted: Tue Mar 18, 2014 11:02 am
by brainfur
Nah no rush. Ill mail you the paper one I made
Posted: Tue Mar 18, 2014 3:09 pm
by cur
What color?
Posted: Tue Mar 18, 2014 3:35 pm
by brainfur
ummmmm cheap tort would be fine I can buy you a blank if you tell me what stuff you like
Posted: Tue Mar 18, 2014 4:21 pm
by cur
grizzly
GFS
Either case get the 11 3/8" x 19 1/4", cuz if I fuck it up the first time, I will have enough for a second one. Only time I ever fucked one up was putting it on the my template upside down and made a lefty my accident.
People say the GFS tort sucks donkey, and Grizzly is better FWIW. Also, make me a second tracing on something heavier than typing paper and use a very sharp pencil. I want two tracings sent to me.
Posted: Tue Mar 18, 2014 4:36 pm
by brainfur
ok, will do-- PM yuor address so I can ship the blank str8 to ya
Posted: Tue Mar 18, 2014 6:38 pm
by cur
jazzmaster
this is from the warmoth site, I printed it and the 1" 1cm scale was right on. How close is it to yours?
Posted: Tue Mar 18, 2014 6:48 pm
by brainfur
yeah its close but the "penis" part that covers the lower route on a jagmaster is about 2 mm too skinny on either side... and of course its routed for jazzy pups instead of WRHB i'll send you the png that I made & printed as a test image so you can see the difference
Posted: Tue Mar 18, 2014 7:09 pm
by brainfur
ok heres how i altered the warmoth guard to fit a jagmaster lemme cut it and double check
Posted: Tue Mar 18, 2014 7:18 pm
by cur
ok, so what was that body to start with?
Posted: Tue Mar 18, 2014 7:22 pm
by brainfur
cur wrote:ok, so what was that body to start with?
it was a jagmaster that had its whole middle part cut out, plugged, and routed like a jazzy minus the upper control cavity (from what I can see anyway-- this thing has been passed around for like 5 or 6 years?) but I have another jagmaster body and I can confirm it has the same fat control route
Posted: Tue Mar 18, 2014 7:31 pm
by cur
24" shortscale, 25" scale or 24" conversion neck scale body? I assume 25" scale body from the neck on it.
Posted: Tue Mar 18, 2014 7:36 pm
by cur
And this might work out well for me. I have the robroe build sitting around my house so I might as will just build it and git it out of my life. Any extra pizza tort I am going to use for that build. OK.
Posted: Tue Mar 18, 2014 7:38 pm
by brainfur
noooo idea what it originally was but the holes for the bridge posts are drilled at 25.5"
I'm using a stock jazzmaster guard on it now which looks like shit but fits everywhere but the lower controls route
Posted: Tue Mar 18, 2014 7:40 pm
by brainfur
cur wrote:And this might work out well for me. I have the robroe build sitting around my house so I might as will just build it and git it out of my life. Any extra pizza tort I am going to use for that build. OK.
nice nice v convenient