Page 1 of 1
How to fit a pickup claw on a Jaguar pickup
Posted: Sat Aug 16, 2014 10:47 pm
by Noirie.
My Jaguar is missing the bridge pickup claw from a pickup swap years ago.
Gonna get a replacement and was wondering whether or not it's a simple process fitting it, or is there anything else I need to do?
Posted: Sun Aug 17, 2014 12:37 am
by dots
so long as you don't pinch and/or crimp the cable (a mistake i made many moons ago), you should be fine.
Posted: Sun Aug 17, 2014 1:31 am
by Thomas
And remember to earth it.
Posted: Sun Aug 17, 2014 8:42 am
by Noirie.
Alright awesome. Thanks guys.
Posted: Sun Aug 17, 2014 11:26 am
by Thomas
When soldering to the claw a little scratch with some sandpaper then some flux will help the solder take. It can be a pain in the ass with that shiny chrome.
Posted: Sun Aug 17, 2014 4:07 pm
by Noirie.
Thomas wrote:When soldering to the claw a little scratch with some sandpaper then some flux will help the solder take. It can be a pain in the ass with that shiny chrome.
Nice one.
Was gonna order some tusq saddles as well but my Mustang bridge gunked up blu tac seems to be holding up well enough I think.