ShortScale.org

I got this Mexican Fender neck and put it on my butterscotch Squier. It fit pretty well. I had to fill two holes and drill, but it mounted fine and is nice and straight. Intonated pretty quick as well. (And is quite a looker.)

20160402_180653 by Christopher Louck, on Flickr

20160402_180711 by Christopher Louck, on Flickr

20160402_180703 by Christopher Louck, on Flickr

What was with the holes?

The two holes on the low E side were like 1/8 of an inch too far in towards the middle so the screw wouldn't thread right on those two.