Which Power Supply?

Pickups, pedals, amps, cabs, combos

Moderated By: mods

User avatar
singlepup
.
.
Posts: 4206
Joined: Fri Dec 10, 2010 4:27 am
Location: San Diego

Which Power Supply?

Post by singlepup »

I am looking for a power supply for my pedals. My last pedal board was powered, and since then I have just used individual power adapters. Starting to get into pedals again. I'd like to have room for about 8-10. Never bought a power supply before.

Do I need isolated power, or can I just get something cheap? Mr. Black doesn't seem to think it's necessary:
http://www.mrblackpedals.com/blogs/str ... r-supplies

What do you all think?
User avatar
NickS
.
.
Posts: 13769
Joined: Mon Jan 14, 2008 9:08 am
Location: Down at the end, round by a corner

Post by NickS »

Whether you need an isolated supply depends on whether you are using it to power more than one pedal, which I guess you are, and the type of pedals. For example, if you'e going to be using a standard negative-earth (-ground, USAers) Boss-type pedal with some of the Line 6 pedals that have a bridge rectifier on the input, or a germanium pedal with positive earth, you will be in trouble. I have a multi-out that drives all my Boss-type (OK, Boss and Behringer) pedals but I have a separate PSU for the Line 6 pedal - which also takes more current.
User avatar
George
.
.
Posts: 20953
Joined: Fri Jul 03, 2009 11:52 am
Location: UK

Post by George »

My T-Rex Fuel Tank didn't stop noise with my germanium boost. Guess it wasn't truly isolated, but it's great for all the voltage options. Also some pedals from the likes of Strymon have an incredible draw so they benefit. As far as other noise in the effects chain goes, I haven't really noticed a difference.

Centre negative pedals like Maxons can come off any other daisy chain, you just need a polarity swap cable between the chain and the pedal, which costs a couple of quid.

On the whole, not sure how important they are (or how important it is to have a "good one") on most rigs, except for being a reliable piece of kit.
User avatar
Bacchus
Whatever's handiest
Posts: 23590
Joined: Thu Apr 20, 2006 4:10 am
Location: wandering

Post by Bacchus »

I recently got an MXR Iso-brick and I'm very happy with it. Cheap for the amount of power it puts out, reasonably versatile, and it's nice and quiet.

Downside is that it uses it's own power supply rather than a standard iec, which might be a point of failure in the future.
Image
User avatar
luciguci
.
.
Posts: 2507
Joined: Fri Jun 01, 2012 6:46 am

Post by luciguci »

I was looking into isolated power because my Super Ego was the source of some weird noise when I had it chained up with the rest of my pedals but then I figured I could just use the (tremendously big lol) power supply that came with it. The rest of my pedals are powered just fine, and I've got two digital reverbs, two digital delays, a digital flanger, pitch shifter, EQ pedal, and a fuzz lol, OneSpot really fucking comes through. I'll probably just buy an extra OneSpot just for the Super Ego alone since its so small.
Doog wrote:Tone is stored in the balls
theshadowofseattle wrote:That's why there's two: one for pee, one for tone.
🏳️‍⚧️🏳️‍🌈 (she/they)
User avatar
singlepup
.
.
Posts: 4206
Joined: Fri Dec 10, 2010 4:27 am
Location: San Diego

Post by singlepup »

Thanks all. Seems like a nice MXR or Voodoo Lab would be lovely, but I can probably get away with a cheap Joyo or the like. I am using mostly Boss-style pedals. I have no problem whatsoever using an additional PSU for the occasional "special" pedal. Really solid advice ITT.
User avatar
aen
Turdscreamer
Posts: 7698
Joined: Sat Apr 22, 2006 5:07 am
Location: ELECTRIC WARRIOR
Contact:

Post by aen »

I've always been a onespot man, and I do pedals for a living.
Most bricks are hunks of shit. Load dependant voltage, shared outputs that are sold as isolated, etc. A friend of mine worked on the road crew for Tallest Man on Earth a while back, and called me just about every other day with a Voodoo labs disaster. The more I looked into it, the worse their reputation became. Just not reliable. I've also seen SEVERAL of them shit the bed at NAMM.

Recently one of our dealers sent us a "onespot pro" which is their brick. THE FIRST AND ONLY TIME a brick has held up to the demands of a gang of Dwarfcraft Devices. The isolation is true, and the voltage is steady.

so, in my professional opinion, get you some onespots, be they brick our daisy chain.
High quality, low popularity Ecstatic Fury
User avatar
Ankhanu
.
.
Posts: 2995
Joined: Tue Nov 10, 2009 4:51 pm
Location: Nova Scotia
Contact:

Post by Ankhanu »

I’ve been using a OneSpot with 8 parallel adapter. No isolation, but noise hasn’t been an issue for me yet... but if I have a noisey pedal later, I’ll likely either use its adapter for it, or grab another OneSpot to power it, if it doesn’t come with one. It’s currently powering a Bass Soul Food, Bass Big Muff, Sub n Up, Alter Ego x4, 30ms, Joyo flanger, Trinity2, and PolyTune. It handles all 8 pedals engaged just fine.

OneSpot Pro sounds tempting
ekwatts wrote:That's American cinema, that is. Fucking sparkles.
Donate to Ankhanu Press
User avatar
singlepup
.
.
Posts: 4206
Joined: Fri Dec 10, 2010 4:27 am
Location: San Diego

Post by singlepup »

Wow, interesting. Daisy Chain plus an extra PSU or 2 will probably work for me then. Thanks for the insight. You guys just saved me a bit of cash.

One Spot users, have you heard of Snark? I have one of their PSUs. Supposed to be even quieter.