My dyna comp is buzzing

AaronGuitarDude · Post by **AaronGuitarDude** » Mon Dec 23, 2019 4:05 pm

[youtube][/youtube]

what is the issue?

NickS · Post by **NickS** » Mon Dec 23, 2019 6:38 pm

Try removing the "s " from https.

NickS · Post by **NickS** » Mon Dec 23, 2019 6:57 pm

When did it start buzzing? What changed?

AaronGuitarDude · Post by **AaronGuitarDude** » Tue Dec 24, 2019 4:30 am

NickS wrote:When did it start buzzing? What changed?

just recently when I check what noise my pedalboard came from. this is the culprit

NickS · Post by **NickS** » Tue Dec 24, 2019 9:32 am

Ok, so the noise/hum has always been there, you just tracked it down. It just sounds to me like single-coil high-gain behaviour. The compressor will bring up whatever is lurking in the depths. Options; turn down the gain on the compressor, use a noise gate/noise reducer pedal, change the pickups to noiseless....
I think your best bet is to fiddle with the compressor and look for ways to reduce the noise pickup; sometimes it's the environment.

Post by **Doog** » Tue Dec 24, 2019 8:44 pm

TBF, that's not 'singlecoily 60 cycle hum' noise, that sounds like your footswitch is dying or there's a stray wire somewhere. Does it make the same noise when touching the metal casing? Have you also tried use it on its own, only thing hooked up to the guitar, amp and PSU?

AaronGuitarDude · Post by **AaronGuitarDude** » Tue Dec 31, 2019 6:46 pm

Doog wrote:TBF, that's not 'singlecoily 60 cycle hum' noise, that sounds like your footswitch is dying or there's a stray wire somewhere. Does it make the same noise when touching the metal casing? Have you also tried use it on its own, only thing hooked up to the guitar, amp and PSU?

only touching footswitch, the sound is like that. I tried use it alone. still the same issue.