Page 1 of 1
Source for vintage fender style 3 ply pickguard material
Posted: Sat Oct 03, 2020 10:02 pm
by Hurb
Looking for some pickguard material in parchment or cream with the thin black stripe found under tort. But without the tort attached.
I can only find the the modern stuff with the thick black line.
Needs to be like this
The spitfire guy uses it under his tort so it must be out there somewhere!
Posted: Sun Oct 04, 2020 1:45 am
by plopswagon
My Gretsch corvette uses the same. I can’t find it
Posted: Sun Oct 04, 2020 7:34 am
by Hurb
Its a pain in the arse! I have a plan though if I can't find it....possibly.
Posted: Thu Oct 08, 2020 8:14 am
by Hurb
Still can not find any.
Closest I got was a company doing a 4 ply tort and the wbw under the tort was right but they were no help when asked if they could sell without the tort layer.
I have ordered some plastic sheeting from ebay that I think is the right thickness. But not sure if it is the right plastic. Or if I can glue it together.
Time will tell.
Posted: Thu Oct 08, 2020 12:38 pm
by plopswagon
Didn’t you say you had a source for proper Mustang/Jaguar knobs?
Posted: Thu Oct 08, 2020 2:51 pm
by Hurb
plopswagon wrote:Didn’t you say you had a source for proper Mustang/Jaguar knobs?
Just found the knobs on ebay.