ShortScale.org

As well as fixing guitars in my school, I also fix guitars in a few friends' schools (yep, all my friends are also now music teachers....)

A common thing that needs replacing is machine heads. Can anyone recommend cheap, 6 in a line tuners that are likely to fit, or at least fit with a minimum amount of modification?

Annoyingly, I can find Gear4Music selling 3x3 tuners for about £11, but their cheapest 6 in a line tuners are locking ones for £20. It like to get this cheaper, and I'd like the replacement parts to be as easy to use as possible (it's very likely that none guitarists will end up restringing these instruments down the line).

This might be a winner.

Also, nuts for pots and jacks are nearly always going to be M8 on budget guitars, yeah? Might buy a big bag of them.

Bacchus wrote: ↑Wed Jan 19, 2022 10:59 am Also, nuts for pots and jacks are nearly always going to be M8 on budget guitars, yeah? Might buy a big bag of them.

Quality of nuts can be variable, I've found. I have a bag of cheap nuts and some fit better than others.

I suppose with that variability it's a matter of matching nuts to shafts, as it were. Probably not as much of an issue if you have 20 guitars with three knobs each, and they'll all need replacing at some point. You'll find somewhere for all of them, I suspect.

Bacchus wrote: ↑Wed Jan 19, 2022 12:37 pm I suppose with that variability it's a matter of matching nuts to shafts, as it were.

Sounds a bit like tonight's "Pointless" - "We're going to show you six Johnsons" said with a perfectly straight face.