ShortScale.org

Posted: **Sat Dec 31, 2022 11:49 pm**

Educated guess: when either knob is all the way off, it shorts the circuit and completely kills the signal. You see this on Gibson L@@K 4 knob dudes. However, that shouldn't matter if you have it switched to either pickup by itself.

Open it up and make sure that the wiring has the volume knob wired BETWEEN the pickup and the switch.

Posted: **Sun Jan 01, 2023 7:16 pm**

theshadowofseattle wrote: ↑Sat Dec 31, 2022 11:49 pm Educated guess: when either knob is all the way off, it shorts the circuit and completely kills the signal. You see this on Gibson L@@K 4 knob dudes. However, that shouldn't matter if you have it switched to either pickup by itself.

Open it up and make sure that the wiring has the volume knob wired BETWEEN the pickup and the switch.

Yeah I'm fairly certain this is the case. I recently looked up the SS wiring for a friend, and was a bit surprised that it was wired this way. It's basically a Gibson volume wiring setup.

Posted: **Mon Jan 02, 2023 3:00 am**

Pens wrote: ↑Sun Jan 01, 2023 7:16 pm
theshadowofseattle wrote: ↑Sat Dec 31, 2022 11:49 pm Educated guess: when either knob is all the way off, it shorts the circuit and completely kills the signal. You see this on Gibson L@@K 4 knob dudes. However, that shouldn't matter if you have it switched to either pickup by itself.

Open it up and make sure that the wiring has the volume knob wired BETWEEN the pickup and the switch.
Yeah I'm fairly certain this is the case. I recently looked up the SS wiring for a friend, and was a bit surprised that it was wired this way. It's basically a Gibson volume wiring setup.

That's how my old Vista one worked. You could have one on 10 and one on 0 to mute the guitar with the toggle. Can't do this with this guitar. The only way you can get it to shut up is have both pickups on 0 no matter position the toggle is on.

Posted: **Mon Jan 02, 2023 6:00 am**

If both knobs on 10 does the toggle change the sound at all? I’d guess a bad switch, common failure point.

Posted: **Mon Jan 02, 2023 9:42 am**

I don't know, that guitar seems to be completely broken to me. It's probably even unsafe to play and hence you have to send it my way.

Posted: **Mon Jan 02, 2023 3:04 pm**

rahbro wrote: ↑Mon Jan 02, 2023 3:00 am
Pens wrote: ↑Sun Jan 01, 2023 7:16 pm
theshadowofseattle wrote: ↑Sat Dec 31, 2022 11:49 pm Educated guess: when either knob is all the way off, it shorts the circuit and completely kills the signal. You see this on Gibson L@@K 4 knob dudes. However, that shouldn't matter if you have it switched to either pickup by itself.

Open it up and make sure that the wiring has the volume knob wired BETWEEN the pickup and the switch.
Yeah I'm fairly certain this is the case. I recently looked up the SS wiring for a friend, and was a bit surprised that it was wired this way. It's basically a Gibson volume wiring setup.

That's how my old Vista one worked. You could have one on 10 and one on 0 to mute the guitar with the toggle. Can't do this with this guitar. The only way you can get it to shut up is have both pickups on 0 no matter position the toggle is on.

I'd need you to open it up and post pics of the wiring to the knobs and the switch to determine what is different on this thing. All I know is how the Vista was wired, I assumed these were the same.

Posted: **Mon Jan 02, 2023 11:52 pm**

2 volumes and a 3 way switch is a great setup. My John 5 tele had it, and you don't even miss the tone control if you don't use treble bleeds on the vol pots.

Posted: **Mon Jan 23, 2023 11:09 am**

rahbro wrote: ↑Mon Jan 02, 2023 3:00 am
Educated guess: when either knob is all the way off, it shorts the circuit and completely kills the signal. You see this on Gibson L@@K 4 knob dudes. However, that shouldn't matter if you have it switched to either pickup by itself.

That's how my old Vista one worked. You could have one on 10 and one on 0 to mute the guitar with the toggle. Can't do this with this guitar. The only way you can get it to shut up is have both pickups on 0 no matter position the toggle is on.

Rob, any chance you (or someone else) could point me to a wiring diagram from a Vista Super Sonic? Recently bought one that has had a bridge pup change and the wiring change to Vol/Tone and I'd like to put it back to stock. Had a look online and couldn't seem to find one not from the paranormal ones. Cheers

Posted: **Tue Jan 24, 2023 8:19 pm**

Just go to Seymour Duncan website and look up Vol/Vol HBHB 3way.

It's in there

Posted: **Wed Jan 25, 2023 2:46 pm**

Broe. You basically just said "google it".

I haven't looked in a while, but here's what I found.

This is not my drawing.

http://geekversusguitar.blogspot.com/2 ... agram.html

This is basically what my Vista had.

Posted: **Thu Jan 26, 2023 2:42 am**

Pens wrote: ↑Wed Jan 25, 2023 2:46 pm Broe. You basically just said "google it".

I haven't looked in a while, but here's what I found.

This is not my drawing.

http://geekversusguitar.blogspot.com/20 ... agram.html

This is basically what my Vista had.

Fiiiiiine. This took me 23 seconds to pull up

: Screenshot_20230125_214041_Chrome.jpg (421.61 KiB) Viewed 2277 times

Posted: **Mon Jan 30, 2023 9:17 am**

Sorry Rob, I thought the SS was slightly different than just 2 vol 2 hum. I heard the knobs and switch were all backwards, which made sense when I watched your video above.

@Pens Thanks

Posted: **Thu Feb 02, 2023 3:08 pm**

I mean you can make them backwards. Just screw them in the opposite pickguard holes.

ShortScale.org

fuckin super sonic volume knobs

fuckin super sonic volume knobs

Re: fuckin super sonic volume knobs

Re: fuckin super sonic volume knobs

Re: fuckin super sonic volume knobs

Re: fuckin super sonic volume knobs

Re: fuckin super sonic volume knobs

Re: fuckin super sonic volume knobs

Re: fuckin super sonic volume knobs

Re: fuckin super sonic volume knobs

Re: fuckin super sonic volume knobs

Re: fuckin super sonic volume knobs

Re: fuckin super sonic volume knobs

Re: fuckin super sonic volume knobs

Re: fuckin super sonic volume knobs